Subversion Repositories SvarDOS

Rev

Rev 982 | Rev 990 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

#
# SvarCOM translation file
# Lang: ENGLISH
#
# Autor: Mateusz Viste
#

# GENERIC MESSAGES USED BY MULTIPLE INTERNAL COMMANDS
0.1:Invalid syntax
0.2:Invalid switch
0.3:Invalid parameter format
0.4:Too many parameters
0.5:Bad command or file name
0.6:Invalid parameter
0.7:Required parameter missing

# SVARCOM HELP SCREEN
1.0:Starts the SvarCOM command interpreter
1.1:COMMAND /E:nnn [/[C|K] [/P] [/D] command]
1.2:/D      Skip AUTOEXEC.BAT processing (makes sense only with /P)
1.3:/E:nnn  Sets the environment size to nnn bytes
1.4:/P      Makes the new command interpreter permanent and run AUTOEXEC.BAT
1.5:/C      Executes the specified command and returns
1.6:/K      Executes the specified command and continues running

# VARIOUS SVARCOM MESSAGES
2.0:SVARCOM VERSION CHANGED. SYSTEM HALTED. PLEASE REBOOT YOUR COMPUTER.
2.1:FATAL ERROR: rmod_install() failed
2.2:SvarCOM: stack overflow detected, command history flushed (this is not a bug)

# CLS
10.0:Clears the screen

# CHCP
11.0:Displays or sets the active code page number.
11.1:CHCP [nnn]
11.2:nnn  Specifies a code page number
11.3:Type CHCP without a parameter to display the active code page number.
11.4:Invalid code page number
11.5:NLSFUNC not installed
11.6:Failed to change code page
11.7:Active code page:

# CD / CHDIR
12.0:Displays the name of or changes the current directory.
12.1:CHDIR [drive:][path]
12.2:CHDIR[..]
12.3:CD [drive:][path]
12.4:CD[..]
12.5:.. Specifies that you want to change to the parent directory.
12.6:Type CD drive: to display the current directory in the specified drive.
12.7:Type CD without parameters to display the current drive and directory.

# CALL
13.0:Calls one batch program from another
13.1:CALL [drive:][path]filename [batch-parameters]

# BREAK
14.0:Sets or clears extended CTRL+C checking
14.1:Type BREAK without a parameter to display the current BREAK setting.
14.2:BREAK is off
14.3:BREAK is on

# PAUSE
15.0:Suspends the execution of a batch script
15.1:Press any key to continue...

# SHIFT
16.0:Changes the position of arguments in a batch file:
16.1:Argument %1 becomes %0, argument %2 becomes %1, etc.

# GOTO
17.0:Directs batch processing to a labelled line in the batch program.
17.1:GOTO LABEL
17.2:LABEL specifies a text string used in the batch program as a label.
17.3:A label is on a line by itself and must be preceded by a colon.
17.10:Label not found

# FOR
18.0:Runs a specified command for each file in a set of files.
18.1:FOR %variable IN (set) DO command [parameters]
18.2:%variable    a replaceable parameter name.
18.3:(set)        a set of one of more space-separated files. Wildcards allowed.
18.4:command      the command to carry out for each matched file.
18.5:parameters   parameters or switches for the specified command.
18.6:To use FOR in a batch program, use %%variable instead of %variable.

# VERIFY
19.0:Tells DOS whether to verify that files are written correctly to disk.
19.1:Type VERIFY without a parameter to display its current setting.
19.2:VERIFY is off
19.3:VERIFY is on
19.4:Must specify ON or OFF

# VER
20.0:Displays the DOS version.
20.1:DOS kernel version %u.%u
20.2:SvarCOM shell ver
20.3:SvarCOM is a shell interpreter for DOS kernels compatible with MS-DOS 5+.
20.4:This software is distributed under the terms of the MIT license.

# TYPE
21.0:Displays the contents of a text file.
21.1:TYPE [drive:][path]filename

# TIME
22.0:Displays or sets the system time.
22.1:TIME [time]
22.2:Type TIME with no parameters to display the current time and a prompt for a\r\nnew one. Press ENTER to keep the same time.
22.3:Current time is
22.4:Invalid time
22.5:Enter new time:

# SET
23.0:Displays, sets, or removes DOS environment variables.
23.1:SET [variable=[string]]
23.2:variable  Specifies the environment-variable name
23.3:string    Specifies a series of characters to assign to the variable
23.4:Type SET without parameters to display the current environment variables.
23.5:Not enough available space within the environment block

# RD / RMDIR
24.0:Removes (deletes) a directory
24.1:RMDIR [drive:]path
24.2:RD [drive:]path

# REN / RENAME
25.0:Renames a file
25.1:RENAME [drive:][path]filename1 filename2
25.2:REN [drive:][path]filename1 filename2
25.3:Note that you cannot specify a new drive or path for your destination file.\r\nUse MOVE to rename a directory, or to move files from one directory to another.
25.4:Invalid destination

# REM
26.0:Records comments (remarks) in a batch file or CONFIG.SYS
26.1:REM [comment]

# PATH
27.0:Displays or sets a search path for executable files.
27.1:PATH [[drive:]path[;...]]
27.2:Type PATH ; to clear all search-path settings and direct DOS to search\r\nonly in the current directory.
27.3:Type PATH without parameters to display the current path.
27.4:No Path

# MD / MKDIR
28.0:Creates a directory
28.1:MKDIR [drive:]path
28.2:MD [drive:]path

# LN
29.0:Adds, deletes or displays executable links.
29.1:LN ADD linkname targetdir
29.2:LN DEL linkname
29.3:LN LIST [pattern]
29.4:No matching executable found in given path.
29.5:%DOSDIR% not defined

# EXIT
30.0:Quits the COMMAND.COM program (command interpreter)

# ECHO
31.0:Displays messages, or turns command-echoing on or off
31.1:ECHO [message]
31.2:Type ECHO without parameters to display the current echo setting.
31.3:ECHO is on
31.4:ECHO is off

# DATE
32.0:Displays or sets the system date.
32.1:DATE [date]
32.2:Type DATE with no parameters to display the current date and a prompt for a\r\nnew one. Press ENTER to keep the same date.
32.3:Invalid date
32.4:Current date is
32.5:Enter new date:

# PROMPT
33.0:Changes the DOS command prompt.
33.1:PROMPT [new command prompt specification]

# DOS ERRORS
255.1:Function number invalid
255.2:File not found
255.3:Path not found
255.4:Too many open files (no handles available)
255.5:Access denied
255.6:Invalid handle
255.7:Memory control block destroyed
255.8:Insufficient memory
255.9:Memory block address invalid
255.10:Environment invalid
255.11:Format invalid
255.12:Access code invalid
255.13:Data invalid
255.15:Invalid drive
255.16:Attempted to remove current directory
255.17:Not same device
255.18:No more files
255.19:Disk write-protected
255.20:Unknown unit
255.21:Drive not ready
255.22:Unknown command
255.23:Data error (CRC)
255.24:Bad request structure length
255.25:Seek error
255.26:Unknown media type (non-DOS disk)
255.27:Sector not found
255.28:Printer out of paper
255.29:Write fault
255.30:Read fault
255.31:General failure
255.32:Sharing violation
255.33:Lock violation
255.34:Disk change invalid
255.35:FCB unavailable
255.36:Sharing buffer overflow
255.37:Code page mismatch
255.38:Cannot complete file operations (EOF / out of input)
255.39:Insufficient disk space