Rev 1833 | Rev 1922 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed
#!/bin/bash
#
# SvarDOS build script
# http://svardos.org
#
# Copyright (C) 2016-2024 Mateusz Viste
#
# This script builds floppy and CD images. It should be executed each time that
# a CORE package has been modified or the build script changed. This is usually
# done by the cron.sh script, itself called by a cron job.
#
# usage: ./build.sh outputdir buildver [noclean] > logfile
#
### parameters block starts here ############################################
REPOROOT=`realpath ./packages`
REPOROOTCORE=`realpath ./packages-core`
CUSTFILES=`realpath ./files`
GENISOIMAGE='' # can be mkisofs, genisoimage or empty for autodetection
### parameters block ends here ##############################################
# look for mandatory output dir and build id
if [ "x$2" == "x" ] ; then
echo "usage: build.sh outputdir buildver [noclean]"
exit 1
fi
CURDATE="$2"
PUBDIR=`realpath "$1"`
CDROOT="$PUBDIR/tmp_cdroot.build"
FLOPROOT="$PUBDIR/tmp_floproot.build"
# auto-detect whether to use mkisofs or genisoimage
if [ "x$GENISOIMAGE" == "x" ] ; then
mkisofs --help 2> /dev/null
if [ $? -eq 0 ] ; then
GENISOIMAGE='mkisofs'
fi
fi
if [ "x$GENISOIMAGE" == "x" ] ; then
genisoimage --help 2> /dev/null
if [ $? -eq 0 ] ; then
GENISOIMAGE='genisoimage'
fi
fi
if [ "x$GENISOIMAGE" == "x" ] ; then
echo "ERROR: neither genisoimage nor mkisofs was found on this system"
exit 1
fi
SED='sed'
if [ `uname` == "Darwin" ] ; then
SED='gsed'
fi
# abort if anything fails
set -e
# list of packages to be part of CORE (always installed)
COREPKGS=`ls -1 'packages-core' | grep -o '^[a-zA-Z0-9]*'`
# prepares image for floppy sets of:
# $1 cylinders
# $2 heads (sides)
# $3 sectors per track
# $4 size
# $5 working directory (for temporary files etc)
# $6 name of the set (eg. "1440k" or "1440k-EN")
# $7 list of packages
# $8 where to put a copy of the image (optional)
function prep_flop {
WORKDIR="$5/$6"
LIST=$7
mkdir "$WORKDIR"
mformat -C -t $1 -h $2 -s $3 -v $CURDATE -B "$CUSTFILES/floppy.mbr" -i "$WORKDIR/disk1.img"
mcopy -sQm -i "$WORKDIR/disk1.img" "$FLOPROOT/"* ::/
# now populate the floppies
curdisk=1
while [ ! -z "$LIST" ] ; do
unset PENDING
for p in $LIST ; do
# if copy fails, then probably the floppy is full - try other packages
# but remember all that fails so they will be retried on a new floppy
if ! mcopy -mi "$WORKDIR/disk$curdisk.img" "$CDROOT/$p.svp" ::/ ; then
PENDING="$PENDING $p"
fi
done
LIST="$PENDING"
# if there are any pending items, then create a new floppy and try pushing pending packages to it
if [ ! -z "$PENDING" ] ; then
curdisk=$((curdisk+1))
mformat -C -t $1 -h $2 -s $3 -v SVARDOS -i "$WORKDIR/disk$curdisk.img"
fi
done
# add a short readme
echo "This directory contains a set of $curdisk floppy images of the SvarDOS distribution in the $4 KB floppy format." > "$WORKDIR/readme.txt"
echo "" >> "$WORKDIR/readme.txt"
echo "These images are raw floppy disk dumps. To write them on an actual floppy disk, you have to use a low-level sector copying tool, like dd." >> "$WORKDIR/readme.txt"
echo "" >> "$WORKDIR/readme.txt"
echo "Latest SvarDOS version is available on the project's homepage: http://svardos.org" >> "$WORKDIR/readme.txt"
unix2dos "$WORKDIR/readme.txt"
# make a copy of the image, if requested
if [ "x$8" != "x" ] ; then
cp "$WORKDIR/disk1.img" $8
fi
# zip the images (and remove them at the same time)
zip -9 -rmj "$PUBDIR/svardos-$CURDATE-floppy-$6.zip" "$WORKDIR"/*
# clean up
rmdir "$WORKDIR"
}
### actual code flow starts here ############################################
# remember where I am, so I can get back here once all is done
origdir=`pwd`
echo "###############################################################################"
echo " STARTING BUILD $CURDATE"
echo "###############################################################################"
echo "dest dir: $PUBDIR"
echo "current time is `date` and it's a beautiful day somewhere in the world"
echo
mkdir "$CDROOT"
mkdir "$FLOPROOT"
# add CORE packages to CDROOT + create the list of packages on floppy
for pkg in $COREPKGS ; do
cp "$REPOROOTCORE/$pkg.svp" "$CDROOT/"
echo "$pkg" >> "$FLOPROOT/install.lst"
done
# add some extra packages to CDROOT but not in the list of packages to install
cp "$REPOROOT/pcntpk.svp" "$CDROOT/"
cp "$REPOROOT/videcdd-2.14.svp" "$CDROOT/videcdd.svp"
#
echo
echo "### Populating the floppy root at $FLOPROOT"
echo
# prepare the content of the boot (install) floppy, unzipping everything
# in lowercase (-L) to avoid any case mismatching later in the build process
cp -r "$CUSTFILES/floppy/"* "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/cpidos.svp" 'cpi/ega*.cpx' -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/svarcom.svp" command.com -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/display.svp" bin/display.exe -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/fdapm.svp" bin/fdapm.com -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/fdisk.svp" bin/fdisk.exe -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/format.svp" bin/format.exe -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/kernledr.svp" kernel.sys -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/mem.svp" bin/mem.exe -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/mode.svp" bin/mode.com -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/more.svp" bin/more.com -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/pkg.svp" bin/pkg.exe -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/sved.svp" bin/sved.com -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/sys.svp" bin/sys.com -d "$FLOPROOT/"
# generate a simple autoexec.bat file
echo '@ECHO OFF' > "$FLOPROOT/autoexec.bat"
echo '' >> "$FLOPROOT/autoexec.bat"
echo 'REM Load DISPLAY driver if present' >> "$FLOPROOT/autoexec.bat"
echo 'IF EXIST DISPLAY.EXE DISPLAY CON=(EGA,,1)' >> "$FLOPROOT/autoexec.bat"
echo '' >> "$FLOPROOT/autoexec.bat"
echo 'FDAPM APMDOS' >> "$FLOPROOT/autoexec.bat"
echo '' >> "$FLOPROOT/autoexec.bat"
echo 'ECHO.' >> "$FLOPROOT/autoexec.bat"
echo 'ECHO ********************' >> "$FLOPROOT/autoexec.bat"
echo 'ECHO WELCOME TO SVARDOS' >> "$FLOPROOT/autoexec.bat"
echo 'ECHO ********************' >> "$FLOPROOT/autoexec.bat"
echo "ECHO build: $CURDATE" >> "$FLOPROOT/autoexec.bat"
echo 'ECHO.' >> "$FLOPROOT/autoexec.bat"
echo '' >> "$FLOPROOT/autoexec.bat"
echo "INSTALL" >> "$FLOPROOT/autoexec.bat"
unix2dos "$FLOPROOT/autoexec.bat"
echo
echo "### Computing the USB image"
echo
# prepare the USB bootable image
USBIMG=$PUBDIR/svardos-usb.img
cp files/boot-svardos.img $USBIMG
mlabel -i "$USBIMG@@32256" ::$CURDATE
mcopy -sQm -i "$USBIMG@@32256" "$FLOPROOT/"* ::/
for p in $COREPKGS ; do
mcopy -mi "$USBIMG@@32256" "$CDROOT/$p.svp" ::/
done
# compress the USB image
zip -mj9 "$PUBDIR/svardos-$CURDATE-usb.zip" "$USBIMG"
echo
echo "### Creating floppy images"
echo
echo "You might notice a lot of DISK FULL warnings below. Do not worry, these"
echo "are expected and are perfectly normal. It is a side effect of trying to"
echo "fit as many packages as possible on the floppy sets."
echo
# build the boot (CD) floppy image
export MTOOLS_NO_VFAT=1
# prepare images for floppies in different sizes (args are C H S SIZE)
echo "videcdd" >> "$FLOPROOT/install.lst"
prep_flop 80 2 36 2880 "$PUBDIR" "2.88M" "$COREPKGS pcntpk videcdd" "$CDROOT/boot.img"
# no videcdd for non-2.88M images
$SED -i '/^videcdd$/d' "$FLOPROOT/install.lst"
prep_flop 80 2 18 1440 "$PUBDIR" "1.44M" "$COREPKGS pcntpk"
prep_flop 80 2 15 1200 "$PUBDIR" "1.2M" "$COREPKGS"
prep_flop 80 2 9 720 "$PUBDIR" "720K" "$COREPKGS"
echo
echo "### Computing DOSEMU.zip"
echo
# prepare the DOSEMU boot zip
DOSEMUDIR="$PUBDIR/tmp_dosemu-prep-files.build"
mkdir "$DOSEMUDIR"
# INSTALL.BAT
echo 'IF NOT EXIST C:\TEMP\NUL MKDIR C:\TEMP' >> "$DOSEMUDIR/install.bat"
echo 'mkdir %DOSDIR%' >> "$DOSEMUDIR/install.bat"
echo 'mkdir %DOSDIR%\cfg' >> "$DOSEMUDIR/install.bat"
echo 'ECHO # pkg config file - specifies locations where packages should be installed >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"
echo 'ECHO DIR BIN %DOSDIR% >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"
echo 'ECHO DIR PROGS C:\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"
echo 'ECHO DIR GAMES C:\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"
echo 'ECHO DIR DRIVERS C:\DRIVERS\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"
echo 'ECHO DIR DEVEL C:\DEVEL\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"
for p in $COREPKGS ; do
cp "$CDROOT/$p.svp" "$DOSEMUDIR/"
echo "pkg install $p.svp" >> "$DOSEMUDIR/install.bat"
echo "del $p.svp" >> "$DOSEMUDIR/install.bat"
done
echo 'ECHO my_ip = dhcp >> %DOSDIR%\CFG\WATTCP.CFG' >> "$DOSEMUDIR/install.bat"
echo 'del pkg.exe' >> "$DOSEMUDIR/install.bat"
echo 'DEL C:\CONFIG.SYS' >> "$DOSEMUDIR/install.bat"
echo 'COPY C:\CONFIG.NEW C:\CONFIG.SYS' >> "$DOSEMUDIR/install.bat"
echo 'DEL C:\CONFIG.NEW' >> "$DOSEMUDIR/install.bat"
echo 'SET COMSPEC=C:\COMMAND.COM' >> "$DOSEMUDIR/install.bat"
echo 'DEL C:\CMD.COM' >> "$DOSEMUDIR/install.bat"
echo 'ECHO.' >> "$DOSEMUDIR/install.bat"
echo 'ECHO -------------------------' >> "$DOSEMUDIR/install.bat"
echo 'ECHO SVARDOS SETUP COMPLETED' >> "$DOSEMUDIR/install.bat"
echo 'ECHO PLEASE RESTART DOSEMU' >> "$DOSEMUDIR/install.bat"
echo 'ECHO -------------------------' >> "$DOSEMUDIR/install.bat"
echo 'ECHO.' >> "$DOSEMUDIR/install.bat"
unzip -Cj "$REPOROOTCORE/kernledr.svp" kernel.sys -d "$DOSEMUDIR/"
unzip -CLj "$REPOROOTCORE/svarcom.svp" command.com -d "$DOSEMUDIR/"
mv "$DOSEMUDIR/command.com" "$DOSEMUDIR/cmd.com"
unzip -Cj "$REPOROOTCORE/pkg.svp" bin/pkg.exe -d "$DOSEMUDIR/"
# CONFIG.SYS
echo 'FILES=25' >> "$DOSEMUDIR/config.sys"
echo 'DOS=HIGH,UMB' >> "$DOSEMUDIR/config.sys"
echo 'DOSDATA=UMB' >> "$DOSEMUDIR/config.sys"
echo 'DEVICE=D:\dosemu\emufs.sys' >> "$DOSEMUDIR/config.sys"
echo 'DEVICE=D:\dosemu\umb.sys' >> "$DOSEMUDIR/config.sys"
echo 'DEVICEHIGH=D:\dosemu\ems.sys' >> "$DOSEMUDIR/config.sys"
echo 'INSTALL=D:\dosemu\emufs.com' >> "$DOSEMUDIR/config.sys"
cp "$DOSEMUDIR/config.sys" "$DOSEMUDIR/config.new"
echo 'SHELL=C:\CMD.COM /P' >> "$DOSEMUDIR/config.sys"
echo 'SHELL=C:\COMMAND.COM /P' >> "$DOSEMUDIR/config.new"
# AUTOEXEC.BAT
echo "@ECHO OFF" >> "$DOSEMUDIR/autoexec.bat"
echo 'SET DOSDIR=C:\SVARDOS' >> "$DOSEMUDIR/autoexec.bat"
echo 'SET WATTCP.CFG=%DOSDIR%\CFG' >> "$DOSEMUDIR/autoexec.bat"
echo 'SET DIRCMD=/p/ogne' >> "$DOSEMUDIR/autoexec.bat"
echo 'SET TEMP=C:\TEMP' >> "$DOSEMUDIR/autoexec.bat"
echo 'PATH %DOSDIR%' >> "$DOSEMUDIR/autoexec.bat"
echo "" >> "$DOSEMUDIR/autoexec.bat"
echo 'IF NOT EXIST INSTALL.BAT GOTO NORMBOOT' >> "$DOSEMUDIR/autoexec.bat"
echo "REM *** this is a one-time setup script used only during first initialization ***" >> "$DOSEMUDIR/autoexec.bat"
echo 'CALL INSTALL.BAT' >> "$DOSEMUDIR/autoexec.bat"
echo 'DEL INSTALL.BAT' >> "$DOSEMUDIR/autoexec.bat"
echo 'GOTO ENDOFFILE' >> "$DOSEMUDIR/autoexec.bat"
echo "" >> "$DOSEMUDIR/autoexec.bat"
echo ":NORMBOOT" >> "$DOSEMUDIR/autoexec.bat"
echo "ECHO." >> "$DOSEMUDIR/autoexec.bat"
echo "ECHO Welcome to SvarDOS (powered by DOSEMU)! Type HELP if you are lost." >> "$DOSEMUDIR/autoexec.bat"
echo "ECHO." >> "$DOSEMUDIR/autoexec.bat"
echo ":ENDOFFILE" >> "$DOSEMUDIR/autoexec.bat"
rm -f "$PUBDIR/svardos-dosemu.zip"
zip -rm9jk "$PUBDIR/svardos-$CURDATE-dosemu.zip" "$DOSEMUDIR"
rmdir "$DOSEMUDIR"
echo
echo "### Generating ISO CD image"
echo
CDISO="$PUBDIR/svardos-$CURDATE-cd.iso"
CDZIP="$PUBDIR/svardos-$CURDATE-cd.zip"
$GENISOIMAGE -input-charset cp437 -b boot.img -iso-level 1 -f -V SVARDOS -o "$CDISO" "$CDROOT/boot.img"
# compress the ISO
zip -mj9 "$CDZIP" "$CDISO"
###############################################################################
# remove internationalization files for EN-ONLY releases. This is the only #
# way to build the 360K variant #
###############################################################################
rm "$FLOPROOT"/*.cpx
rm "$FLOPROOT"/install.lng
rm "$FLOPROOT"/display.exe
rm "$FLOPROOT"/mode.com
###############################################################################
# remove NLS and LNG files from packages to build EN-ONLY builds #
###############################################################################
echo "### remove NLS and LNG files from packages to build EN-ONLY builds"
for p in $COREPKGS ; do
# the || true bit is because zip returns a non-zero exit code on no file match
zip -dq "$CDROOT/$p.svp" 'bin/*.lng' 'BIN/*.LNG' 'nls/*' 'NLS/*' || true
done
prep_flop 80 2 18 1440 "$PUBDIR" "1.44M-EN_ONLY" "$COREPKGS"
#prep_flop 80 2 21 1680 "$PUBDIR" "1.44M-DMF-EN_ONLY"
prep_flop 80 2 15 1200 "$PUBDIR" "1.2M-EN_ONLY" "$COREPKGS"
prep_flop 80 2 9 720 "$PUBDIR" "720K-EN_ONLY" "$COREPKGS"
prep_flop 40 2 9 360 "$PUBDIR" "360K-EN_ONLY" "$COREPKGS"
###############################################################################
# compute the svardos stub, useful for migrating alien DOS systems to SvarDOS #
###############################################################################
echo
echo "### generating the pkgstub zip archive"
mkdir "$PUBDIR"/pkgstub
unzip -jC "$REPOROOTCORE"/pkgnet.svp bin/pkgnet.exe -d "$PUBDIR"/pkgstub
unzip -jC "$REPOROOTCORE"/pkg.svp bin/pkg.exe -d "$PUBDIR"/pkgstub
cat <<EOF > "$PUBDIR"/pkgstub/readme.txt
SvarDOS stub, or how to plant a SvarDOS seed in a foreign land
--------------------------------------------------------------
This archive contains files that allow to install a SvarDOS stub within
another DOS system. This makes it possible to use the SvarDOS online repository
of packages on non-SvarDOS systems, assuming you have a network card connected
to the internet and a suitable packet driver.
If you do not have internet connectivity, then you will still be able to
install SvarDOS packages (*.SVP) once you copy them to your PC. You can fetch
SvarDOS packages at <http://svardos.org>.
Follow the guide now:
=======================================
MKDIR C:\\SVARDOS
MKDIR C:\\SVARDOS\\CFG
SET WATTCP.CFG=C:\\SVARDOS\\CFG
SET DOSDIR=C:\\SVARDOS
SET LANG=EN
SET PATH=%PATH%;C:\SVARDOS
COPY *.EXE C:\\SVARDOS\\
COPY *.CFG C:\\SVARDOS\CFG\\
=======================================
If in doubt, reach out to us at <http://svardos.org>.
EOF
cat <<EOF > "$PUBDIR"/pkgstub/wattcp.cfg
# Rely on DHCP by default
my_ip = dhcp
# modify (and uncomment) these if you have a fix IP setup:
#
#my_ip = 0.0.0.0 ; IP address
#netmask = 255.255.255.0 ; netmask
#nameserver = 0.0.0.0 ; primary DNS, mandatory if not using DHCP
#nameserver = 0.0.0.0 ; secondary DNS, optional
#gateway = 0.0.0.0 ; default gateway
EOF
cat <<EOF > "$PUBDIR"/pkgstub/pkg.cfg
# pkg config file - specifies locations where SvarDOS packages will be installed
# SvarDOS core files
DIR BIN C:\\SVARDOS\\
# General location for programs
DIR PROGS C:\\
# Games
DIR GAMES C:\\
# Drivers
DIR DRIVERS C:\\DRIVERS\\
# Development tools
DIR DEVEL C:\\DEVEL\\
EOF
zip -m -k9jr "$PUBDIR"/svarstub.zip "$PUBDIR"/pkgstub
rmdir "$PUBDIR"/pkgstub
###############################################################################
# cleanup all temporary things #
###############################################################################
if [ "x$2" != "xnoclean" ] ; then
echo
echo "### Cleanup of temporary directories:"
echo "# $CDROOT"
echo "# $FLOPROOT"
echo
rm -rf "$CDROOT" "$FLOPROOT"
fi
cd "$origdir"
echo
echo "### ALL DONE! ###"
exit 0