Rev 2181 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed
/*
* SVARDOS INSTALL PROGRAM
*
* PUBLISHED UNDER THE TERMS OF THE MIT LICENSE
*
* COPYRIGHT (C) 2016-2024 MATEUSZ VISTE, ALL RIGHTS RESERVED.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* http://svardos.org
*/
#include <dos.h>
#include <direct.h> /* mkdir() */
#include <stdio.h> /* printf() and friends */
#include <stdlib.h> /* system() */
#include <string.h> /* memcpy() */
#include <unistd.h>
#include "mdr\cout.h"
#include "mdr\dos.h"
#include "svarlang.lib\svarlang.h"
/* keyboard layouts and locales */
#include "keylay.h"
#include "keyoff.h"
/* color scheme (preset for color) */
static unsigned char COLOR_TITLEBAR = 0x70;
static unsigned char COLOR_TITLEVER = 0x78;
static unsigned char COLOR_BODY = 0x17;
static unsigned char COLOR_BODYWARN = 0x1F;
static unsigned char COLOR_SELECT = 0x70;
static unsigned char COLOR_SELECTCUR = 0x1F;
/* build release string, populated at startup by reading floppy's label */
static char BUILDSTRING[13];
/* how much disk space does SvarDOS require (in MiB) */
#define SVARDOS_DISK_REQ 4
/* menu screens can output only one of these: */
#define MENUNEXT 0
#define MENUPREV -1
#define MENUQUIT -2
/* a convenience 'function' used for debugging */
#define DBG(x) { video_putstringfix(24, 0, 0x4F00u, x, 80); }
struct slocales {
char lang[4];
const char *keybcode;
unsigned short codepage;
unsigned char egafile;
unsigned char keybfile;
short keyboff;
short keyblen;
unsigned short keybid;
unsigned short countryid; /* 1=USA, 33=FR, 48=PL, etc */
};
/* a special routine to display a message trough the video BIOS. this is much
* slower than direct writes to video memory, but it is the only way to make
* provox read such info message */
static void infomsg(unsigned char row, unsigned char col, const char *msg, unsigned char attr, unsigned short maxlen);
#pragma aux infomsg = \
"mov cx, 1" \
"xor bh, bh" \
"NEXT:" \
/* put cursor at position [dl,dh] */ \
"mov ah, 0x02" \
"int 0x10" \
/* am I allowed to print more? */ \
"test di, di" \
"jz DONE" \
/* write char (unless nul terminator) */ \
"mov ah, 0x09" \
"lodsb" \
"test al, al" \
"jz DONE" \
"int 0x10" \
"inc dl" \
"dec di" \
"jmp short NEXT" \
"DONE:" \
modify [ax bx cx dx si di] \
parm [dh] [dl] [si] [bl] [di]
/* install a dummy int24h handler that always fails. this is to avoid the
* annoying "abort, retry, fail... DOS messages. */
static void install_int24(void) {
static unsigned char handler[] = { /* contains machine code instructions */
0xB0, 0x03, /* mov al, 3 ; tell DOS the action has to FAIL */
0xCF}; /* ret ; return from the interrupt handler */
/* install the handler */
_asm {
push dx
mov ax, 0x2524 /* set INT vector 0x24 (to DS:DX) */
mov dx, offset handler /* DS:DX points at my dummy handler */
int 0x21
pop dx
}
}
static void exec(const char *s) {
system(s);
install_int24(); /* reinstall my int24 handler, apparently system() reverts
the original (DOS) one */
}
/* put a string on screen and fill it until w chars with white space */
static void video_putstringfix(unsigned char y, unsigned char x, unsigned char attr, const char *s, unsigned char w) {
unsigned char i;
/* print the string up to w characters */
i = mdr_cout_str(y, x, s, attr, w);
/* fill in left space (if any) with blanks */
mdr_cout_char_rep(y, x + i, ' ', attr, w - i);
}
/* reboot the computer */
static void reboot(void) {
void ((far *bootroutine)()) = (void (far *)()) 0xFFFF0000L;
int far *rstaddr = (int far *)0x00400072L; /* BIOS boot flag is at 0040:0072 */
*rstaddr = 0x1234; /* 0x1234 = warm boot, 0 = cold boot */
(*bootroutine)(); /* jump to the BIOS reboot routine at FFFF:0000 */
}
/* returns 1 if file exists, zero otherwise */
static int fileexists(const char *fname) {
FILE *fd;
fd = fopen(fname, "rb");
if (fd == NULL) return(0);
fclose(fd);
return(1);
}
/* outputs a string to screen with taking care of word wrapping. returns amount of lines. */
static unsigned char putstringwrap(unsigned char y, unsigned char x, unsigned char attr, const char *s) {
unsigned char linew, lincount;
linew = 80 - (x << 1);
for (lincount = 1; y+lincount < 25; lincount++) {
int i, len = linew;
for (i = 0; i <= linew; i++) {
if (s[i] == ' ') len = i;
if (s[i] == '\n') {
len = i;
break;
}
if (s[i] == 0) {
len = i;
break;
}
}
infomsg(y++, x, s, attr, len);
s += len;
if (*s == 0) break;
s += 1; /* skip the whitespace char */
}
return(lincount);
}
/* an NLS wrapper around video_putstring(), also performs line wrapping when
* needed. returns the amount of lines that were output */
static unsigned char putstringnls(unsigned char y, unsigned char x, unsigned char attr, unsigned char nlsmaj, unsigned char nlsmin) {
const char *s = svarlang_str(nlsmaj, nlsmin);
if (s == NULL) s = "";
return(putstringwrap(y, x, attr, s));
}
/* copy file f1 to f2 using buff as a buffer of buffsz bytes. f2 will be overwritten if it
* exists already! returns 0 on success. */
static int fcopy(const char *f2, const char *f1, void *buff, size_t buffsz) {
FILE *fd1, *fd2;
size_t sz;
int res = -1; /* assume failure */
/* open files */
fd1 = fopen(f1, "rb");
fd2 = fopen(f2, "wb");
if ((fd1 == NULL) || (fd2 == NULL)) goto QUIT;
/* copy data */
for (;;) {
sz = fread(buff, 1, buffsz, fd1);
if (sz == 0) {
if (feof(fd1) != 0) break;
goto QUIT;
}
if (fwrite(buff, 1, sz, fd2) != sz) goto QUIT;
}
res = 0; /* success */
QUIT:
if (fd1 != NULL) fclose(fd1);
if (fd2 != NULL) fclose(fd2);
return(res);
}
/* display a menu with items and return user's choice.
* ypos: starting line where the menu is drawn
* height: max number of items to display inside the menu
* list: NULL-terminated list of items
* maxlistlen: limit list to this many items tops */
static int menuselect(unsigned char ypos, unsigned char height, const char **list, int maxlistlen) {
int i, offset = 0, res = 0, count;
unsigned char y, xpos, width = 0;
/* count how many positions there are, and check their width */
for (count = 0; (list[count] != NULL) && (count != maxlistlen); count++) {
int len = strlen(list[count]);
if (len > width) width = len;
}
width++; /* it's nice to have a small margin to the right of the widest item */
/* adjust height if there is less items than max height */
if (count < height) height = count;
/* if xpos negative, means 'center out' */
xpos = 39 - (width >> 1);
mdr_cout_char_rep(ypos, xpos, 0xC4, COLOR_SELECT, width + 2); /* top line */
mdr_cout_char(ypos, xpos+width+2, 0xBF, COLOR_SELECT); /* \ */
mdr_cout_char(ypos, xpos-1, 0xDA, COLOR_SELECT); /* / */
ypos++; /* from now on ypos relates to the position of the content */
mdr_cout_char(ypos+height, xpos-1, 0xC0, COLOR_SELECT); /* \ */
mdr_cout_char(ypos+height, xpos+width+2, 0xD9, COLOR_SELECT);/* / */
mdr_cout_char_rep(ypos+height, xpos, 0xC4, COLOR_SELECT, width + 2);
for (;;) {
int key;
/* draw side borders of the menu + the cursor */
if (count <= height) { /* no need for a cursor, all fits on one page */
i = 255;
} else {
i = offset * (height - 1) / (count - height);
}
for (y = ypos; y < (ypos + height); y++) {
mdr_cout_char(y, xpos-1, 0xB3, COLOR_SELECT); /* left side */
if (y - ypos == i) {
mdr_cout_char(y, xpos+width+2, ' ', 0); /* cursor */
} else {
mdr_cout_char(y, xpos+width+2, 0xB3, COLOR_SELECT); /* right side */
}
}
/* list of selectable items */
for (i = 0; i < height; i++) {
if (i + offset == res) {
mdr_cout_char(ypos + i, xpos, 16, COLOR_SELECTCUR);
mdr_cout_char(ypos + i, xpos+width+1, 17, COLOR_SELECTCUR);
mdr_cout_locate(ypos + i, xpos);
video_putstringfix(ypos + i, xpos+1, COLOR_SELECTCUR, list[i + offset], width);
} else if (i + offset < count) {
mdr_cout_char(ypos + i, xpos, ' ', COLOR_SELECT);
mdr_cout_char(ypos + i, xpos+width+1, ' ', COLOR_SELECT);
video_putstringfix(ypos + i, xpos+1, COLOR_SELECT, list[i + offset], width);
} else {
mdr_cout_char_rep(ypos + i, xpos, ' ', COLOR_SELECT, width+2);
}
}
key = mdr_dos_getkey();
if (key == 0x0D) { /* ENTER */
return(res);
} else if (key == 0x148) { /* up */
UP_AGAIN:
if (res > 0) {
res--;
if (res < offset) offset = res;
if (list[res][0] == 0) goto UP_AGAIN;
}
} else if (key == 0x150) { /* down */
DOWN_AGAIN:
if (res+1 < count) {
res++;
if (res > offset + height - 1) offset = res - (height - 1);
if (list[res][0] == 0) goto DOWN_AGAIN;
}
} else if (key == 0x147) { /* home */
res = 0;
offset = 0;
} else if (key == 0x14F) { /* end */
res = count - 1;
if (res > offset + height - 1) offset = res - (height - 1);
} else if (key == 0x1B) { /* ESC */
return(-1);
}/* else {
char buf[8];
snprintf(buf, sizeof(buf), "0x%02X ", key);
video_putstring(1, 0, COLOR_BODY, buf, -1);
}*/
}
}
static void newscreen(unsigned char statusbartype) {
const char *msg;
mdr_cout_cls(COLOR_BODY);
msg = svarlang_strid(0x00); /* "SVARDOS INSTALLATION" */
mdr_cout_char_rep(0, 0, ' ', COLOR_TITLEBAR, 80);
mdr_cout_str(0, 40 - (strlen(msg) >> 1), msg, COLOR_TITLEBAR, 80);
mdr_cout_str(0, 80 - strlen(BUILDSTRING), BUILDSTRING, COLOR_TITLEVER, 12);
switch (statusbartype) {
case 1:
msg = svarlang_strid(0x000B); /* "Up/Down = Select entry | Enter = Validate your choice | ESC = Quit to DOS" */
break;
case 2:
msg = svarlang_strid(0x0005); /* "Press any key..." */
break;
case 3:
msg = "";
break;
default:
msg = svarlang_strid(0x000A); /* "Up/Down = Select entry | Enter = Validate your choice | ESC = Previous screen" */
break;
}
mdr_cout_char(24, 0, ' ', COLOR_TITLEBAR);
video_putstringfix(24, 1, COLOR_TITLEBAR, msg, 79);
mdr_cout_locate(25,0);
}
/* fills a slocales struct accordingly to the value of its keyboff member */
static void kblay2slocal(struct slocales *locales) {
const char *m;
for (m = kblayouts[locales->keyboff]; *m != 0; m++); /* skip layout name */
m++;
/* skip keyb code and copy it to locales.keybcode */
locales->keybcode = m;
for (; *m != 0; m++);
/* */
locales->codepage = ((unsigned short)m[1] << 8) | m[2];
locales->egafile = m[3];
locales->keybfile = m[4];
locales->keybid = ((unsigned short)m[5] << 8) | m[6];
locales->countryid = ((unsigned short)m[7] << 8) | m[8];
}
static int selectlang(struct slocales *locales) {
int choice, x;
const char *msg;
const char *langlist[] = {
"English",
"Brazilian",
"French",
"German",
"Italian",
"Polish",
"Russian",
"Slovene",
"Swedish",
"Turkish",
NULL
};
newscreen(1);
msg = svarlang_strid(0x0100); /* "Welcome to SvarDOS" */
x = 40 - (strlen(msg) >> 1);
infomsg(4, x, msg, COLOR_BODY, 80);
mdr_cout_char_rep(5, x, '=', COLOR_BODY, strlen(msg));
/* center out the string "Please select your language..." */
msg = svarlang_str(1, 1); /* "Please select your language from the list below:" */
if (strlen(msg) > 74) {
putstringwrap(8, 1, COLOR_BODY, msg);
} else {
infomsg(8, 40 - (strlen(msg) / 2), msg, COLOR_BODY, 80);
}
choice = menuselect(11, 9, langlist, -1);
if (choice < 0) return(MENUPREV);
/* populate locales with default values */
memset(locales, 0, sizeof(struct slocales));
switch (choice) {
case 1:
strcpy(locales->lang, "BR");
locales->keyboff = OFFLOC_BR;
locales->keyblen = OFFLEN_BR;
break;
case 2:
strcpy(locales->lang, "FR");
locales->keyboff = OFFLOC_FR;
locales->keyblen = OFFLEN_FR;
break;
case 3:
strcpy(locales->lang, "DE");
locales->keyboff = OFFLOC_DE;
locales->keyblen = OFFLEN_DE;
break;
case 4:
strcpy(locales->lang, "IT");
locales->keyboff = OFFLOC_IT;
locales->keyblen = OFFLEN_IT;
break;
case 5:
strcpy(locales->lang, "PL");
locales->keyboff = OFFLOC_PL;
locales->keyblen = OFFLEN_PL;
break;
case 6:
strcpy(locales->lang, "RU");
locales->keyboff = OFFLOC_RU;
locales->keyblen = OFFLEN_RU;
break;
case 7:
strcpy(locales->lang, "SI");
locales->keyboff = OFFLOC_SI;
locales->keyblen = OFFLEN_SI;
break;
case 8:
strcpy(locales->lang, "SV");
locales->keyboff = OFFLOC_SV;
locales->keyblen = OFFLEN_SV;
break;
case 9:
strcpy(locales->lang, "TR");
locales->keyboff = OFFLOC_TR;
locales->keyblen = OFFLEN_TR;
break;
default:
strcpy(locales->lang, "EN");
locales->keyboff = 0;
locales->keyblen = OFFCOUNT;
break;
}
/* populate the slocales struct accordingly to the keyboff member */
kblay2slocal(locales);
/* */
return(MENUNEXT);
}
static int selectkeyb(struct slocales *locales) {
int menuheight, choice;
if (locales->keyblen == 1) return(MENUNEXT); /* do not ask for keyboard layout if only one is available for given language */
newscreen(0);
putstringnls(5, 1, COLOR_BODY, 1, 5); /* "SvarDOS supports different keyboard layouts */
menuheight = locales->keyblen;
if (menuheight > 11) menuheight = 11;
choice = menuselect(10, menuheight, &(kblayouts[locales->keyboff]), locales->keyblen);
if (choice < 0) return(MENUPREV);
/* (re)load the keyboard layout & codepage setup */
locales->keyboff += choice;
kblay2slocal(locales);
return(MENUNEXT);
}
/* returns 0 if installation must proceed, non-zero otherwise */
static int welcomescreen(void) {
int c;
const char *choice[3];
choice[0] = svarlang_strid(0x0001);
choice[1] = svarlang_strid(0x0002);
choice[2] = NULL;
newscreen(0);
putstringnls(4, 1, COLOR_BODY, 2, 0); /* "You are about to install SvarDOS */
c = menuselect(13, 2, choice, -1);
if (c < 0) return(MENUPREV);
if (c == 0) return(MENUNEXT);
return(MENUQUIT);
}
/* returns total disk space of drive drv (in MiB, max 2048, A=1 B=2 etc), or -1 if drive invalid */
static int disksize(unsigned char drv) {
struct diskfree_t df;
long res;
if (_dos_getdiskfree(drv, &df) != 0) return(-1);
res = df.sectors_per_cluster;
res *= df.total_clusters;
res *= df.bytes_per_sector;
res >>= 20;
return((int)res);
}
/* returns 0 if disk is empty, non-zero otherwise */
static int diskempty(char drv) {
unsigned int rc;
int res;
char buff[8];
struct find_t fileinfo;
snprintf(buff, sizeof(buff), "%c:\\*.*", drv);
rc = _dos_findfirst(buff, _A_NORMAL | _A_SUBDIR | _A_HIDDEN | _A_SYSTEM, &fileinfo);
if (rc == 0) {
res = 1; /* call successfull means disk is not empty */
} else {
res = 0;
}
/* _dos_findclose(&fileinfo); */ /* apparently required only on OS/2 */
return(res);
}
/* replace all occurences of char a by char b in s */
static void strtr(char *s, char a, char b) {
for (;*s != 0; s++) {
if (*s == a) *s = b;
}
}
/* tries to write an empty file to drive.
* asks DOS to inhibit the int 24h handler for this job, so erros are
* gracefully reported - unfortunately this does not work under FreeDOS because
* the DOS-C kernel does not implement the required flag.
* returns 0 on success (ie. "disk exists and is writeable"). */
static unsigned short test_drive_write(char drive) {
unsigned short result = 0;
char *buff = "@:\\SVWRTEST.123";
buff[0] = drive;
_asm {
push ax
push bx
push cx
push dx
mov ah, 0x6c /* extended open/create file */
mov bx, 0x2001 /* open for write + inhibit int 24h handler */
xor cx, cx /* file attributes on the created file */
mov dx, 0x0010 /* create file if does not exist, fail if it exists */
mov si, buff /* filename to create */
int 0x21
jc FAILURE
/* close the file (handle in AX) */
mov bx, ax
mov ah, 0x3e /* close file */
int 0x21
jc FAILURE
/* delete the file */
mov ah, 0x41 /* delete file pointed out by DS:DX */
mov dx, buff
int 0x21
jnc DONE
FAILURE:
mov result, ax
DONE:
pop dx
pop cx
pop bx
pop ax
}
return(result);
}
#define MBR_WRITE 3
#define MBR_READ 2
/* read (action=2) or write (action=3) MBR of driveid (0x80, 0x81..) into buff */
static int READ_OR_WRITE_MBR(unsigned char action, char *buff, unsigned char driveid);
#pragma aux READ_OR_WRITE_MBR = \
"push es" \
"mov al, 1" /* read 1 sector into memory */ \
"mov cx, 0x0001" /* cylinder 0, sector 1 */ \
"xor dh, dh" /* head 0 */ \
"push ds" \
"pop es" \
"int 0x13" \
"mov ax, 0" /* do not do "xor ax, ax", CF needs to be preserved */ \
"jnc DONE" \
"inc ax" \
"DONE:" \
"pop es" \
parm [ah] [bx] [dl] \
modify [cx dx] \
value [ax]
/*
* MBR structure:
*
* Boot signature (word 0xAA55) is at 0x01FE
*
* partition entry 1 is at 0x01BE
* 2 at 0x01CE
* 3 at 0x01DE
* 4 at 0x01EE
*
* a partition entry is:
* 0x00 status byte (active is bit 0x80 set)
* 0x01 CHS addr of first sector (here: HEAD)
* 0x02 CHS addr of first sector (CCSSSSSS) sector in 6 low bits, cylinder high bits in CC
* 0x03 CHS addr of furst sector (here: low 8 bits of cylinder)
* 0x04 Partition type:
0x06/0x08 for CHS FAT16/32
0x0E/0x0C for LBA FAT16/32
* 0x05 CHS addr of last sector (same format as for 1st sector)
* 0x06 CHS addr of last sector (same format as for 1st sector)
* 0x07 CHS addr of last sector (same format as for 1st sector)
* 0x08 LBA addr of first sector (4 bytes) - used sometimes instead of CHS
* 0x0C number of sectors in partition (4 bytes)
*/
struct drivelist {
unsigned long start_lba;
unsigned long tot_sect; /* size (of partition), in sectors */
unsigned short tot_size; /* size in MiB */
unsigned char partid; /* position of the partition in the MBR (0,1,2,3) */
unsigned char hd; /* 0-3 */
unsigned char dosid; /* DOS drive id (A=0, B=1...)*/
};
/* a (very partial) struct mimicking what EDR-DOS uses in int 2Fh,AX=0803h */
#pragma pack (push)
#pragma pack (0) /* disable the automatic alignment of struct members */
struct dos_udsc {
unsigned short next_off; /* offset FFFFh if last */
unsigned short next_seg;
unsigned char hd; /* physical unit (as in int 13h) */
unsigned char letter; /* DOS letter drive (A=0, B=1, C=2, ...) */
unsigned short sectsize; /* bytes per sector */
unsigned char unknown[15];
unsigned long start_lba; /* LBA address of the partition (only for primary partitions) */
};
#pragma pack (pop)
/* get the DOS drive data table list */
static struct dos_udsc far *get_dos_udsc(void);
#pragma aux get_dos_udsc = \
"push ds" \
"mov ax, 0x0803" \
"int 0x2f" /* drive data table list is in DS:DI, error if DI is 0xffff */ \
"push ds" \
"pop es" \
"pop ds" \
"cmp di, 0xffff" \
"jne DONE" \
"xor di, di" \
"mov es, di" \
"DONE:" \
modify [ax] \
value [es di]
/* returns 0 if fsid is a valid (recognized) filesystem for SvarDOS install */
static int is_fstype_valid(unsigned char fsid) {
switch (fsid) {
case 0x01: /* FAT-12 in first 32M of disk */
case 0x04: /* FAT-16 partition that resides within first 32M of disk */
case 0x06: /* FAT-16B with 64K+ sectors, must be within first 8G of disk */
case 0x0B: /* FAT-32 with CHS addressing */
case 0x0C: /* FAT-32 with LBA addressing */
case 0x0E: /* FAT-16B with LBA addressing */
return(0);
default:
return(-1);
}
}
/* reads the MBR and matches its entries to DOS drives
* fills the drives array with up to 16 drives (4 partitions * 4 disks)
* see https://github.com/SvarDOS/bugz/issues/89 */
static int get_drives_list(char *buff, struct drivelist *drives) {
int i;
int listlen = 0;
int drv;
struct dos_udsc far *udsc_root = get_dos_udsc();
struct dos_udsc far *udsc_node;
for (drv = 0x80; drv < 0x84; drv++) {
if (READ_OR_WRITE_MBR(MBR_READ, buff, drv) != 0) continue;
/* check boot signature at 0x01fe */
if (*(unsigned short *)(buff + 0x01fe) != 0xAA55) continue;
/* iterate over the 4 partitions in the MBR */
for (i = 0; i < 4; i++) {
unsigned char *entry;
entry = buff + 0x01BE + (i * 16);
/* ignore partition if fs is unknown (non-FAT) */
if (is_fstype_valid(entry[4]) != 0) continue;
bzero(&(drives[listlen]), sizeof(struct drivelist));
drives[listlen].hd = drv & 3;
drives[listlen].partid = i;
drives[listlen].start_lba = ((unsigned long *)entry)[2];
drives[listlen].tot_sect = ((unsigned long *)entry)[3];
/* now iterate over DOS drives and try to match one to this MBR entry */
udsc_node = udsc_root;
while (udsc_node != NULL) {
if (udsc_node->hd != drv) goto NEXT;
if (udsc_node->start_lba != drives[listlen].start_lba) goto NEXT;
/* FOUND! */
drives[listlen].dosid = udsc_node->letter;
{
unsigned long sz = (drives[listlen].tot_sect * udsc_node->sectsize) >> 20;
drives[listlen].tot_size = (unsigned short)sz;
}
listlen++;
break;
NEXT:
if (udsc_node->next_off == 0xffff) break;
udsc_node = MK_FP(udsc_node->next_seg, udsc_node->next_off);
} /* iterate over UDSC nodes */
} /* iterate over partition entries of the MBR */
} /* iterate over BIOS disks (0x80, 0x81, ...) */
return(listlen);
}
/* displays a list of drives and asks user to choose one for installation
* returns a word with bits HHPPLLLLLLLL where:
* HH = hard drive id (0..3)
* PP = position of the partition in MBR (0..3)
* LL... = drive's DOS id (A=0, B=1, C=2, ...) */
static int selectdrive(void) {
char buff[512];
struct drivelist drives[16];
char drvlist[16][32]; /* up to 16 drives (4 partitions on 4 disks) */
int i, drvlistlen;
const char *menulist[16];
unsigned char driveid = 1; /* fdisk runs on first drive (unless USB boot) */
/* read MBR of first HDD */
drvlistlen = get_drives_list(buff, drives);
/* if no drive found - disk not partitioned? */
if (drvlistlen == 0) {
const char *list[4];
newscreen(0);
list[0] = svarlang_str(0, 3); /* Create a partition automatically */
list[1] = svarlang_str(0, 4); /* Run the FDISK tool */
list[2] = svarlang_str(0, 2); /* Quit to DOS */
list[3] = NULL;
snprintf(buff, sizeof(buff), svarlang_strid(0x0300), SVARDOS_DISK_REQ); /* "ERROR: No drive could be found. Note, that SvarDOS requires at least %d MiB of available disk space */
switch (menuselect(6 + putstringwrap(4, 1, COLOR_BODY, buff), 3, list, -1)) {
case 0:
sprintf(buff, "FDISK /PRI:MAX %u", driveid);
exec(buff);
break;
case 1:
mdr_cout_cls(0x07);
mdr_cout_locate(0, 0);
sprintf(buff, "FDISK %u", driveid);
exec(buff);
break;
case 2:
return(MENUQUIT);
default:
return(-1);
}
/* write a temporary MBR which only skips the drive (in case BIOS would
* try to boot off the not-yet-ready C: disk) */
sprintf(buff, "FDISK /LOADIPL %u", driveid);
exec(buff); /* writes BOOT.MBR into actual MBR */
newscreen(2);
putstringnls(10, 10, COLOR_BODY, 3, 1); /* "Your computer will reboot now." */
putstringnls(12, 10, COLOR_BODY, 0, 5); /* "Press any key..." */
mdr_dos_getkey();
reboot();
return(MENUQUIT);
}
/* build a menu with all drives */
for (i = 0; i < drvlistlen; i++) {
snprintf(drvlist[i], sizeof(drvlist[0]), "%c: [%u MiB, hd%c%u]", 'A' + drives[i].dosid, drives[i].tot_size, 'a' + drives[i].hd, drives[i].partid);
menulist[i] = drvlist[i];
}
menulist[i++] = "";
menulist[i++] = svarlang_str(0, 2); /* Quit to DOS */
menulist[i] = NULL;
newscreen(0);
snprintf(buff, sizeof(buff), "%s", svarlang_strid(0x0307));
i = menuselect(7 + putstringwrap(4, 1, COLOR_BODY, buff) /*ypos*/, 10 /*max-height*/, menulist, -1);
if (i < 0) {
return(MENUPREV);
} else if (i < drvlistlen) {
/* return a bitfield HHPPLLLLLLLL
* HH = hard drive id (0..3)
* PP = position of the partition in MBR (0..3)
* LL... = drive's DOS id (A=0, B=1, C=2, ...) */
return((drives[i].partid << 8) | (drives[i].hd << 10) | drives[i].dosid);
}
return(MENUQUIT);
}
/* hd_drv is a bitfield HHPPLLLLLLLL
* HH = hard drive id (0..3)
* PP = position of the partition in MBR (0..3)
* LL... = drive's DOS id (A=0, B=1, C=2, ...) */
static int preparedrive(int hd_drv) {
unsigned char selecteddrive;
unsigned char driveid, partid;
char cselecteddrive;
int choice;
char buff[512];
/* decode hd and drive id from hd_drv */
selecteddrive = hd_drv & 0xff; /* DOS drive letter (A=0. B=1, C=2 etc) */
partid = (hd_drv >> 8) & 3; /* position of partition in MBR (0..3) */
driveid = (hd_drv >> 10); /* HDD identifier (0..3) */
cselecteddrive = 'A' + selecteddrive;
TRY_AGAIN:
/* if not formatted, propose to format it right away (try to create a directory) */
if (test_drive_write(cselecteddrive) != 0) {
const char *list[3];
newscreen(0);
snprintf(buff, sizeof(buff), svarlang_str(3, 3), cselecteddrive); /* "ERROR: Drive %c: seems to be unformated. Do you wish to format it?") */
infomsg(7, 1, buff, COLOR_BODY, 80);
snprintf(buff, sizeof(buff), svarlang_strid(0x0007), cselecteddrive); /* "Format drive %c:" */
list[0] = buff;
list[1] = svarlang_strid(0x0002); /* "Quit to DOS" */
list[2] = NULL;
choice = menuselect(12, 2, list, -1);
if (choice < 0) return(MENUPREV);
if (choice == 1) return(MENUQUIT);
mdr_cout_cls(0x07);
mdr_cout_locate(0, 0);
snprintf(buff, sizeof(buff), "FORMAT %c: /Q /U /Z:seriously /V:SVARDOS", cselecteddrive);
exec(buff);
goto TRY_AGAIN;
}
/* check total disk space */
if (disksize(selecteddrive+1) < SVARDOS_DISK_REQ) {
int y = 9;
newscreen(2);
snprintf(buff, sizeof(buff), svarlang_strid(0x0304), cselecteddrive, SVARDOS_DISK_REQ); /* "ERROR: Drive %c: is not big enough! SvarDOS requires a disk of at least %d MiB." */
y += putstringwrap(y, 1, COLOR_BODY, buff);
putstringnls(++y, 1, COLOR_BODY, 0, 5); /* "Press any key..." */
mdr_dos_getkey();
return(MENUPREV);
}
/* is the disk empty? */
newscreen(0);
if (diskempty(cselecteddrive) != 0) {
const char *list[3];
int y = 6;
snprintf(buff, sizeof(buff), svarlang_strid(0x0305), cselecteddrive); /* "ERROR: Drive %c: not empty" */
y += putstringwrap(y, 1, COLOR_BODY, buff);
snprintf(buff, sizeof(buff), svarlang_strid(0x0007), cselecteddrive); /* "Format drive %c:" */
list[0] = buff;
list[1] = svarlang_strid(0x0002); /* "Quit to DOS" */
list[2] = NULL;
choice = menuselect(++y, 2, list, -1);
if (choice < 0) return(MENUPREV);
if (choice == 1) return(MENUQUIT);
mdr_cout_cls(0x07);
mdr_cout_locate(0, 0);
snprintf(buff, sizeof(buff), "FORMAT %c: /Q /U /Z:seriously /V:SVARDOS", cselecteddrive);
exec(buff);
goto TRY_AGAIN;
} else {
/* final confirmation */
const char *list[3];
list[0] = svarlang_strid(0x0001); /* Install SvarDOS */
list[1] = svarlang_strid(0x0002); /* Quit to DOS */
list[2] = NULL;
snprintf(buff, sizeof(buff), svarlang_strid(0x0306), cselecteddrive); /* "The installation of SvarDOS to %c: is about to begin." */
infomsg(7, 40 - (strlen(buff) / 2), buff, COLOR_BODY, 80);
choice = menuselect(10, 2, list, -1);
if (choice < 0) return(MENUPREV);
if (choice == 1) return(MENUQUIT);
/* update the disk's MBR, transfer the boot system, make sure the partition
* is ACTIVE and create a TEMP directory to copy SVP files over */
snprintf(buff, sizeof(buff), "SYS %c: > NUL", cselecteddrive);
exec(buff);
sprintf(buff, "FDISK /MBR %u", driveid + 1);
exec(buff);
if (READ_OR_WRITE_MBR(MBR_READ, buff, driveid | 0x80) == 0) {
/* active flags for part 0,1,2,3 are at offsets 0x01BE, 0x01CE, 0x01DE, 0x01EE */
unsigned char i, flag_before, changed = 0;
unsigned short memoffset = 0x01BE; /* first partition flag is here */
for (i = 0; i < 4; i++) {
flag_before = buff[memoffset];
buff[memoffset] &= 127;
if (i == partid) buff[memoffset] |= 0x80;
if (flag_before != buff[memoffset]) changed++;
memoffset += 16; /* jump to next partition entry */
}
/* do I need to update the MBR? */
if (changed != 0) READ_OR_WRITE_MBR(MBR_WRITE, buff, driveid | 0x80);
}
snprintf(buff, sizeof(buff), "%c:\\TEMP", cselecteddrive);
mkdir(buff);
return(0);
}
}
/* generates locales-related configurations and writes them to file (this
* is used to compute autoexec.bat content) */
static void genlocalesconf(FILE *fd, const struct slocales *locales) {
fprintf(fd, "SET LANG=%s\r\n", locales->lang);
if (locales->egafile > 0) {
fprintf(fd, "DISPLAY CON=(EGA,,1)\r\n");
if (locales->egafile == 1) {
fprintf(fd, "MODE CON CP PREPARE=((%u) %%DOSDIR%%\\CPI\\EGA.CPX)\r\n", locales->codepage);
} else {
fprintf(fd, "MODE CON CP PREPARE=((%u) %%DOSDIR%%\\CPI\\EGA%u.CPX)\r\n", locales->codepage, locales->egafile);
}
fprintf(fd, "MODE CON CP SELECT=%u\r\n", locales->codepage);
}
if (locales->keybfile > 0) {
fprintf(fd, "KEYB %s,%d,%%DOSDIR%%\\", locales->keybcode, locales->codepage);
if (locales->keybfile == 1) {
fprintf(fd, "KEYBOARD.SYS");
} else {
fprintf(fd, "KEYBRD%u.SYS", locales->keybfile);
}
if (locales->keybid != 0) fprintf(fd, " /ID:%d", locales->keybid);
fprintf(fd, "\r\n");
}
}
/* get the DOS "current drive" (0=A:, 1=B:, etc) */
static unsigned char get_cur_drive(void);
#pragma aux get_cur_drive = \
"mov ah, 0x19" /* DOS 1+ GET CURRENT DEFAULT DRIVE */ \
"int 0x21" \
modify [ah] \
value [al]
/* generates configuration files on the dest drive, this is run once system
* booted successfully on the dst drive (postinst stage) */
static void bootfilesgen(void) {
char buff[128];
FILE *fd;
unsigned char bootdrv = get_cur_drive() + 'A';
struct slocales locales;
/* load locales from ZLOCALES.DAT */
fd = fopen("ZLOCALES.DAT", "rb");
if (fd == NULL) return;
fread(&locales, sizeof(struct slocales), 1, fd);
fclose(fd);
svarlang_load("INSTALL.LNG", locales.lang);
/****************
* CONFIG.SYS ***
****************/
snprintf(buff, sizeof(buff), "%c:\\CONFIG.SYS", bootdrv);
fd = fopen(buff, "wb");
if (fd == NULL) return;
fprintf(fd, "; SvarDOS kernel configuration\r\n"
"\r\n"
"; highest allowed drive letter\r\n"
"LASTDRIVE=Z\r\n"
"\r\n"
"; max. number of files that programs are allowed to open simultaneously\r\n"
"FILES=25\r\n");
fprintf(fd, "\r\n"
"; XMS memory driver\r\n"
"DEVICE=%c:\\SVARDOS\\HIMEMX.EXE\r\n", bootdrv);
fprintf(fd, "\r\n"
"; try moving DOS to upper memory, then to high memory\r\n"
"DOS=UMB,HIGH\r\n");
fprintf(fd, "\r\n"
"; command interpreter (shell) location and environment size\r\n"
"SHELL=%c:\\COMMAND.COM /E:512 /P\r\n", bootdrv);
fprintf(fd, "\r\n"
"; NLS configuration\r\n");
fprintf(fd, "COUNTRY=%03u,%u,%c:\\SVARDOS\\COUNTRY.SYS\r\n", locales.countryid, locales.codepage, bootdrv);
/* insert provox initialization if to be installed */
if (fileexists("PROVOX.SVP")) {
fprintf(fd, "\r\n"
"; PROVOX SCREEN READER DRIVER\r\n"
"DEVICE=%c:\\DRIVERS\\PROVOX\\PROVOX7.EXE\r\n", bootdrv);
}
fprintf(fd, "\r\n"
"; CD-ROM driver initialization\r\n"
";DEVICE=%c:\\DRIVERS\\VIDECDD\\VIDE-CDD.SYS /D:SVCD0001\r\n", bootdrv);
fclose(fd);
/****************
* AUTOEXEC.BAT *
****************/
snprintf(buff, sizeof(buff), "%c:\\TEMP\\AUTOEXEC.BAT", bootdrv);
fd = fopen(buff, "wb");
if (fd == NULL) {
return;
} else {
char *autoexec_bat1 =
"@ECHO OFF\r\n"
"SET TEMP=#:\\TEMP\r\n"
"SET DOSDIR=#:\\SVARDOS\r\n"
"SET NLSPATH=%DOSDIR%\\NLS\r\n"
"SET DIRCMD=/O/P\r\n"
"SET WATTCP.CFG=%DOSDIR%\r\n"
"PATH %DOSDIR%\r\n"
"PROMPT $P$G\r\n"
"\r\n"
"REM enable CPU power saving\r\n"
"FDAPM ADV:REG\r\n"
"\r\n";
char *autoexec_bat2 =
"REM Uncomment the line below for CDROM support\r\n"
"REM SHSUCDX /d:SVCD0001\r\n"
"\r\n"
"ECHO.\r\n";
/* replace all '#' occurences by bootdrive */
strtr(autoexec_bat1, '#', bootdrv);
/* write all to file */
fputs(autoexec_bat1, fd);
/* insert provox initialization if to be installed */
if (fileexists("PROVOX.SVP")) {
fprintf(fd, "%c:\\DRIVERS\\PROVOX\\PV7.EXE BNS\r\n", bootdrv);
}
genlocalesconf(fd, &locales);
fputs(autoexec_bat2, fd);
fprintf(fd, "ECHO %s\r\n", svarlang_strid(0x0600)); /* "Welcome to SvarDOS!" */
fclose(fd);
}
/*** CREATE DIRECTORY FOR CONFIGURATION FILES ***/
snprintf(buff, sizeof(buff), "%c:\\SVARDOS", bootdrv);
mkdir(buff);
/****************
* PKG.CFG *
****************/
snprintf(buff, sizeof(buff), "%c:\\SVARDOS\\PKG.CFG", bootdrv);
fd = fopen(buff, "wb");
if (fd == NULL) {
return;
} else {
char *pkg_cfg =
"# pkg config file - specifies locations where packages should be installed\r\n"
"\r\n"
"# System boot drive\r\n"
"BOOTDRIVE @\r\n"
"\r\n"
"# DOS core binaries\r\n"
"DIR BIN @:\\SVARDOS\r\n"
"\r\n"
"# Programs\r\n"
"DIR PROGS @:\\\r\n"
"\r\n"
"# Games \r\n"
"DIR GAMES @:\\\r\n"
"\r\n"
"# Drivers\r\n"
"DIR DRIVERS @:\\DRIVERS\r\n"
"\r\n"
"# Development tools\r\n"
"DIR DEVEL @:\\DEVEL\r\n";
/* replace all @ by the actual boot drive */
strtr(pkg_cfg, '@', bootdrv);
/* write to file */
fputs(pkg_cfg, fd);
fclose(fd);
}
/****************
* PICOTCP *
****************/
/* TODO (or not? maybe not that useful) */
/****************
* WATTCP.CFG *
****************/
snprintf(buff, sizeof(buff), "%c:\\SVARDOS\\WATTCP.CFG", bootdrv);
fd = fopen(buff, "wb");
if (fd == NULL) return;
fprintf(fd, "my_ip = dhcp\r\n"
"#my_ip = 192.168.0.7\r\n"
"#netmask = 255.255.255.0\r\n"
"#nameserver = 192.168.0.1\r\n"
"#nameserver = 192.168.0.2\r\n"
"#gateway = 192.168.0.1\r\n");
fclose(fd);
/****************
* POSTINST.BAT *
****************/
/* create the postinst.bat file for actual installation of packages */
fd = fopen("POSTINST.BAT", "wb");
if (fd == NULL) return;
fprintf(fd,
"@ECHO OFF\r\n"
"SET DOSDIR=%c:\\SVARDOS\r\n"
"PATH %%DOSDIR%%\r\n"
"ECHO INSTALLING PACKAGES\r\n"
"COPY \\COMMAND.COM \\CMD.COM\r\n" /* move COMMAND.COM so it does not clashes with the installation of the SVARCOM package */
"SET COMSPEC=%c:\\CMD.COM\r\n"
"DEL \\AUTOEXEC.BAT\r\n"
"COPY AUTOEXEC.BAT \\\r\n"
"DEL AUTOEXEC.BAT\r\n"
"DEL ZLOCALES.DAT\r\n"
"DEL \\COMMAND.COM\r\n"
"DEL \\KERNEL.SYS\r\n" /* KERNEL.SYS will be installed from the package in a moment */
"FOR %%%%P IN (*.SVP) DO PKG INOWARN %%%%P\r\n" /* install packages (with warnings muted) */
"DEL *.SVP\r\n", bootdrv, bootdrv);
/* restore COMSPEC and do some cleanup */
fprintf(fd, "DEL pkg.exe\r\n"
"DEL install.com\r\n"
"DEL install.lng\r\n"
"SET COMSPEC=\\COMMAND.COM\r\n"
"DEL \\CMD.COM\r\n");
/* print out the "installation over" message (load codepage first, now that MODE is installed) */
genlocalesconf(fd, &locales);
fprintf(fd, "ECHO.\r\n"
"ECHO ");
fprintf(fd, svarlang_strid(0x0502)); /* "SvarDOS installation is over. Please restart your computer now" */
fprintf(fd, "\r\n"
"ECHO.\r\n");
fclose(fd);
}
static int copypackages(char drvletter, const struct slocales *locales) {
char pkglist[512];
int i, pkglistlen;
size_t pkglistflen;
char buff[1024]; /* must be *at least* 1 sector big for efficient file copying */
FILE *fd = NULL;
char *pkgptr;
newscreen(3);
/* load pkg list */
fd = fopen("install.lst", "rb");
if (fd == NULL) {
infomsg(10, 30, "ERROR: INSTALL.LST NOT FOUND", COLOR_BODY, 80);
mdr_dos_getkey();
return(-1);
}
pkglistflen = fread(pkglist, 1, sizeof(pkglist) - 2, fd);
fclose(fd);
if (pkglistflen == sizeof(pkglist) - 2) {
infomsg(10, 30, "ERROR: INSTALL.LST TOO LARGE", COLOR_BODY, 80);
mdr_dos_getkey();
return(-1);
}
/* mark the end of list */
pkglist[pkglistflen] = 0;
pkglist[pkglistflen + 1] = 0xff;
/* replace all \r and \n chars by 0 bytes, and count the number of packages */
pkglistlen = 0;
for (i = 0; i < pkglistflen; i++) {
switch (pkglist[i]) {
case '\n':
pkglistlen++;
/* FALLTHRU */
case '\r':
pkglist[i] = 0;
break;
}
}
/* copy pkg.exe, install.com and install.lng to the new drive, along with all packages */
snprintf(buff, sizeof(buff), "%c:\\TEMP\\PKG.EXE", drvletter);
fcopy(buff, buff + 8, buff, sizeof(buff));
snprintf(buff, sizeof(buff), "%c:\\TEMP\\INSTALL.COM", drvletter);
fcopy(buff, buff + 8, buff, sizeof(buff));
snprintf(buff, sizeof(buff), "%c:\\TEMP\\INSTALL.LNG", drvletter);
fcopy(buff, buff + 8, buff, sizeof(buff));
/* copy the PROVOX driver, if present */
if (fileexists("provox.exe")) {
snprintf(buff, sizeof(buff), "%c:\\TEMP\\PROVOX.EXE", drvletter);
fcopy(buff, buff + 8, buff, sizeof(buff));
snprintf(buff, sizeof(buff), "%c:\\TEMP\\PV.EXE", drvletter);
fcopy(buff, buff + 8, buff, sizeof(buff));
}
/* copy packages */
for (i = 0;; i++) {
RETRY_ENTIRE_LIST:
/* move forward to nearest entry or end of list */
for (pkgptr = pkglist; *pkgptr == 0; pkgptr++);
if (*pkgptr == 0xff) break; /* end of list: means all packages have been processed */
/* is this package present on the floppy disk? */
TRY_NEXTPKG:
sprintf(buff, "%s.svp", pkgptr);
if (!fileexists(buff)) {
while (*pkgptr != 0) pkgptr++;
while (*pkgptr == 0) pkgptr++;
/* end of list? ask for next floppy, there's nothing interesting left on this one */
if (*pkgptr == 0xff) {
putstringnls(12, 1, COLOR_BODY, 4, 1); /* "INSERT THE DISK THAT CONTAINS THE REQUIRED FILE AND PRESS ANY KEY" */
mdr_dos_getkey();
video_putstringfix(12, 1, COLOR_BODY, "", 80); /* erase the 'insert disk' message */
goto RETRY_ENTIRE_LIST;
}
goto TRY_NEXTPKG;
}
/* copy the package */
snprintf(buff, sizeof(buff), svarlang_strid(0x0400), i+1, pkglistlen, pkgptr); /* "Copying package %d/%d: %s" */
strcat(buff, " ");
infomsg(10, 1, buff, COLOR_BODY, 80);
/* proceed with package copy */
sprintf(buff, "%c:\\TEMP\\%s.svp", drvletter, pkgptr);
if (fcopy(buff, buff + 8, buff, sizeof(buff)) != 0) {
infomsg(10, 30, "READ ERROR", COLOR_BODY, 80);
mdr_dos_getkey();
return(-1);
}
/* jump to next entry or end of list and zero out the pkg name in the process */
while ((*pkgptr != 0) && (*pkgptr != 0xff)) {
*pkgptr = 0;
pkgptr++;
}
}
/* dump locales into ZLOCALES.DAT so the 2nd stage install can get them back */
snprintf(buff, sizeof(buff), "%c:\\TEMP\\ZLOCALES.DAT", drvletter);
fd = fopen(buff, "wb");
if (fd == NULL) return(-1);
fwrite(locales, sizeof(struct slocales), 1, fd);
fclose(fd);
/* prepare a dummy autoexec.bat that will exec install and call temp\postinst.bat */
snprintf(buff, sizeof(buff), "%c:\\autoexec.bat", drvletter);
fd = fopen(buff, "wb");
if (fd == NULL) return(-1);
fprintf(fd, "@ECHO OFF\r\n"
"CD TEMP\r\n"
"IF EXIST PROVOX.EXE PROVOX.EXE\r\n"
"IF EXIST PV.EXE PV BNS\r\n"
"install\r\n" /* installer will run in 2nd stage (generating autoexec.bat, pkg.cfg and stuff) */
"postinst.bat\r\n");
fclose(fd);
return(0);
}
static void finalreboot(void) {
int y = 9;
newscreen(2);
y += putstringnls(y, 1, COLOR_BODY, 5, 0); /* "Your computer will reboot now." */
y += putstringnls(y, 1, COLOR_BODYWARN, 5, 1); /* Please remove the installation disk from your drive" */
putstringnls(++y, 1, COLOR_BODY, 0, 5); /* "Press any key..." */
mdr_dos_getkey();
reboot();
}
static void reinit_ega(void);
#pragma aux reinit_ega = \
"mov ah, 0x0f" /* get current video mode */ \
"int 0x10" /* al contains the current video mode now */ \
"or al, 128" /* set AL's high bit so BIOS does not flush VRAM (EGA+) */ \
"xor ah, ah" /* re-set video mode (to whatever is set in AL) */ \
"int 0x10" \
modify [ax bx]
static void loadcp(const struct slocales *locales) {
char buff[64];
if (locales->codepage == 437) return;
mdr_cout_locate(1, 0);
if (locales->egafile == 1) {
snprintf(buff, sizeof(buff), "MODE CON CP PREP=((%u) EGA.CPX) > NUL", locales->codepage);
} else {
snprintf(buff, sizeof(buff), "MODE CON CP PREP=((%u) EGA%d.CPX) > NUL", locales->codepage, locales->egafile);
}
exec(buff);
snprintf(buff, sizeof(buff), "MODE CON CP SEL=%u > NUL", locales->codepage);
exec(buff);
/* below I re-init the video controller - apparently this is required if
* I want the new glyph symbols to be actually applied, at least some
* (broken?) BIOSes, like VBox, apply glyphs only at next video mode change */
reinit_ega();
}
int main(void) {
struct slocales locales;
int targetdrv;
int action;
/* setup an internal int 24h handler ("always fail") so DOS does not output
* the ugly "abort, retry, fail" messages */
install_int24();
/* init screen and detect mono adapters */
if (mdr_cout_init(NULL, NULL) == 0) {
/* overload color scheme with mono settings */
COLOR_TITLEBAR = 0x70;
COLOR_TITLEVER = 0x70;
COLOR_BODY = 0x07;
COLOR_BODYWARN = 0x07;
COLOR_SELECT = 0x70;
COLOR_SELECTCUR = 0x07;
}
/* is it stage 2 of the installation? */
if (fileexists("ZLOCALES.DAT")) goto GENCONF;
/* read the svardos build revision (from floppy label) */
{
const char *fspec = "*.*";
const char *res = (void*)0x9E; /* default DTA is at PSP:80h, field 1Eh of DTA is the ASCIZ file name */
_asm {
push cx
push dx
mov ax, 0x4e00 /* findfirst */
mov cx, 0x08 /* file attr mask, 0x08 = volume label */
mov dx, fspec
int 0x21
jnc good
mov bx, res
mov [bx], byte ptr 0
good:
pop dx
pop cx
}
memcpy(BUILDSTRING, res, 12);
}
SelectLang:
action = selectlang(&locales); /* welcome to svardos, select your language */
if (action != MENUNEXT) goto QUIT;
loadcp(&locales);
svarlang_load("INSTALL.LNG", locales.lang); /* NLS support */
action = selectkeyb(&locales); /* what keyb layout should we use? */
if (action == MENUQUIT) goto QUIT;
if (action == MENUPREV) goto SelectLang;
WelcomeScreen:
action = welcomescreen(); /* what svardos is, ask whether to run live dos or install */
if (action == MENUQUIT) goto QUIT;
if (action == MENUPREV) goto SelectLang;
SelDriveScreen:
targetdrv = selectdrive();
if (targetdrv == MENUQUIT) goto QUIT;
if (targetdrv == MENUPREV) goto WelcomeScreen;
action = preparedrive(targetdrv); /* what drive should we install to? check avail. space */
if (action == MENUQUIT) goto QUIT;
if (action == MENUPREV) goto SelDriveScreen;
targetdrv = (targetdrv & 0xff) + 'A'; /* convert the part+hd+drv value to a DOS letter */
/* copy packages to dst drive */
if (copypackages(targetdrv, &locales) != 0) goto QUIT;
finalreboot(); /* remove the install medium and reboot */
goto QUIT;
GENCONF: /* second stage of the installation (run from the destination disk) */
bootfilesgen(); /* generate boot files and other configurations */
QUIT:
mdr_cout_locate(0, 0);
mdr_cout_close();
return(0);
}