WebSVN – SvarDOS – Diff – /build.sh


#!/bin/bash
#
# SvarDOS build script
# http://svardos.org
# Copyright (C) 2016-2023 Mateusz Viste
#
# This script builds floppy and CD images. It should be executed each time that
# a CORE package has been modified or the build script changed. This is usually
# done by the cron.sh script, itself called by a cron job.
#
# usage: ./build.sh outputdir buildver [noclean] > logfile
#
 
### parameters block starts here ############################################
 
REPOROOT=`realpath ./packages`
REPOROOTCORE=`realpath ./packages-core`
CUSTFILES=`realpath ./files`
 
GENISOIMAGE=''    # can be mkisofs, genisoimage or empty for autodetection
 
### parameters block ends here ##############################################
 
# look for mandatory output dir and build id
if [ "x$2" == "x" ] ; then
  echo "usage: build.sh outputdir buildver [noclean]"
  exit 1
fi
CURDATE="$2"
PUBDIR=`realpath "$1"`
 
CDROOT="$PUBDIR/tmp_cdroot.build"
FLOPROOT="$PUBDIR/tmp_floproot.build"
 
 
# auto-detect whether to use mkisofs or genisoimage
 
if [ "x$GENISOIMAGE" == "x" ] ; then
mkisofs --help 2> /dev/null
if [ $? -eq 0 ] ; then
  GENISOIMAGE='mkisofs'
fi
fi
 
if [ "x$GENISOIMAGE" == "x" ] ; then
genisoimage --help 2> /dev/null
if [ $? -eq 0 ] ; then
  GENISOIMAGE='genisoimage'
fi
fi
 
if [ "x$GENISOIMAGE" == "x" ] ; then
  echo "ERROR: neither genisoimage nor mkisofs was found on this system"
  exit 1
fi
 
 
# abort if anything fails
set -e
 
 
# list of packages to be part of CORE (always installed)
COREPKGS=`ls -1 'packages-core' | grep -o '^[a-z]*'`
 
# list of packages to be part of EXTRA (only sometimes installed, typically drivers)
EXTRAPKGS="pcntpk udvd2"
 
# all packages
ALLPKGS="$COREPKGS $EXTRAPKGS"
 
 
# prepares image for floppy sets of:
# $1 cylinders
# $2 heads (sides)
# $3 sectors per track
# $4 size
# $5 working directory (for temporary files etc)
# $6 name of the set (eg. "1440k" or "1440k-EN")
# $7 where to put a copy of the image (optional)
function prep_flop {
  WORKDIR="$5/$6"
  mkdir "$WORKDIR"
  mformat -C -t $1 -h $2 -s $3 -v SVARDOS -B "$CUSTFILES/floppy.mbr" -i "$WORKDIR/disk1.img"
  mcopy -sQm -i "$WORKDIR/disk1.img" "$FLOPROOT/"* ::/
 
  # now populate the floppies
  curdisk=1
  LIST=$ALLPKGS
 
  while [ ! -z "$LIST" ] ; do
 
    unset PENDING
    for p in $LIST ; do
      # if copy fails, then probably the floppy is full - try other packages
      # but remember all that fails so they will be retried on a new floppy
      if ! mcopy -mi "$WORKDIR/disk$curdisk.img" "$CDROOT/$p.svp" ::/ ; then
        PENDING="$PENDING $p"
      fi
    done
 
    LIST="$PENDING"
    # if there are any pending items, then create a new floppy and try pushing pending packages to it
    if [ ! -z "$PENDING" ] ; then
      curdisk=$((curdisk+1))
      mformat -C -t $1 -h $2 -s $3 -v SVARDOS -i "$WORKDIR/disk$curdisk.img"
    fi
 
  done
 
  # add a short readme
  echo "This directory contains a set of $curdisk floppy images of the SvarDOS distribution in the $4 KB floppy format." > "$WORKDIR/readme.txt"
  echo "" >> "$WORKDIR/readme.txt"
  echo "These images are raw floppy disk dumps. To write them on an actual floppy disk, you have to use a low-level sector copying tool, like dd." >> "$WORKDIR/readme.txt"
  echo "" >> "$WORKDIR/readme.txt"
  echo "Latest SvarDOS version is available on the project's homepage: http://svardos.org" >> "$WORKDIR/readme.txt"
 
  unix2dos "$WORKDIR/readme.txt"
 
  # make a copy of the image, if requested
  if [ "x$7" != "x" ] ; then
    cp "$WORKDIR/disk1.img" $7
  fi
 
  # zip the images (and remove them at the same time)
  zip -9 -rmj "$PUBDIR/svardos-$CURDATE-floppy-$6.zip" "$WORKDIR"/*
 
  # clean up
  rmdir "$WORKDIR"
}
 
 
### actual code flow starts here ############################################
 
# remember where I am, so I can get back here once all is done
origdir=`pwd`
 
echo "###############################################################################"
echo " STARTING BUILD $CURDATE"
echo "###############################################################################"
echo "dest dir: $PUBDIR"
echo "current time is `date` and it's a beautiful day somewhere in the world"
echo
 
mkdir "$CDROOT"
mkdir "$FLOPROOT"
 
# add CORE packages to CDROOT + create the list of packages on floppy
for pkg in $COREPKGS ; do
  cp "$REPOROOTCORE/$pkg.svp" "$CDROOT/"
  echo "$pkg" >> "$FLOPROOT/install.lst"
done
 
# add EXTRA packages to CDROOT (but not in the list of packages to install)
for pkg in $EXTRAPKGS ; do
  cp "$REPOROOT/$pkg.svp" "$CDROOT/"
done
 
 
echo
echo "### Populating the floppy root at $FLOPROOT"
echo
 
# prepare the content of the boot (install) floppy, unzipping everything
# in lowercase (-L) to avoid any case mismatching later in the build process
cp -r "$CUSTFILES/floppy/"* "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/cpidos.svp" 'cpi/ega*.cpx' -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/svarcom.svp" command.com -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/display.svp" bin/display.exe -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/fdapm.svp" bin/fdapm.com -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/fdisk.svp" bin/fdisk.exe -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/format.svp" bin/format.exe -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/kernel.svp" bin/kernel.sys bin/sys.com -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/mem.svp" bin/mem.exe -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/mode.svp" bin/mode.com -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/more.svp" bin/more.com -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/pkg.svp" bin/pkg.exe -d "$FLOPROOT/"
unzip -CLj "$REPOROOTCORE/sved.svp" bin/sved.com -d "$FLOPROOT/"
 
# generate a simple autoexec.bat file
echo '@ECHO OFF' > "$FLOPROOT/autoexec.bat"
echo '' >> "$FLOPROOT/autoexec.bat"
echo 'REM Load DISPLAY driver if present' >> "$FLOPROOT/autoexec.bat"
echo 'IF EXIST DISPLAY.EXE DISPLAY CON=(EGA,,1)' >> "$FLOPROOT/autoexec.bat"
echo '' >> "$FLOPROOT/autoexec.bat"
echo 'FDAPM APMDOS' >> "$FLOPROOT/autoexec.bat"
echo '' >> "$FLOPROOT/autoexec.bat"
echo 'ECHO.' >> "$FLOPROOT/autoexec.bat"
echo 'ECHO  ********************' >> "$FLOPROOT/autoexec.bat"
echo 'ECHO   WELCOME TO SVARDOS' >> "$FLOPROOT/autoexec.bat"
echo 'ECHO  ********************' >> "$FLOPROOT/autoexec.bat"
echo "ECHO  build: $CURDATE" >> "$FLOPROOT/autoexec.bat"
echo 'ECHO.' >> "$FLOPROOT/autoexec.bat"
echo '' >> "$FLOPROOT/autoexec.bat"
echo "INSTALL $CURDATE" >> "$FLOPROOT/autoexec.bat"
unix2dos "$FLOPROOT/autoexec.bat"
 
 
echo
echo "### Computing the USB image"
echo
 
# prepare the USB bootable image
USBIMG=$PUBDIR/svardos-usb.img
cp files/boot-svardos.img $USBIMG
mcopy -sQm -i "$USBIMG@@32256" "$FLOPROOT/"* ::/
for p in $ALLPKGS ; do
  mcopy -mi "$USBIMG@@32256" "$CDROOT/$p.svp" ::/
done
 
# compress the USB image
zip -mj9 "$PUBDIR/svardos-$CURDATE-usb.zip" "$USBIMG"
 
 
echo
echo "### Creating floppy images"
echo
echo "You might notice a lot of DISK FULL warnings below. Do not worry, these"
echo "are expected and are perfectly normal. It is a side effect of trying to"
echo "fit as many packages as possible on the floppy sets."
echo
 
# build the boot (CD) floppy image
export MTOOLS_NO_VFAT=1
 
# prepare images for floppies in different sizes (args are C H S SIZE)
prep_flop 80 2 36 2880 "$PUBDIR" "2.88M" "$CDROOT/boot.img"
prep_flop 80 2 18 1440 "$PUBDIR" "1.44M"
prep_flop 80 2 15 1200 "$PUBDIR" "1.2M"
prep_flop 80 2  9  720 "$PUBDIR" "720K"
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
echo
echo "### Computing DOSEMU.zip"
echo
 
# prepare the DOSEMU boot zip
DOSEMUDIR="$PUBDIR/tmp_dosemu-prep-files.build"
mkdir "$DOSEMUDIR"
# INSTALL.BAT
echo 'IF NOT EXIST C:\TEMP\NUL MKDIR C:\TEMP' >> "$DOSEMUDIR/install.bat"
echo 'mkdir %DOSDIR%' >> "$DOSEMUDIR/install.bat"
echo 'mkdir %DOSDIR%\cfg' >> "$DOSEMUDIR/install.bat"
echo 'ECHO # pkg config file - specifies locations where packages should be installed >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"
echo 'ECHO DIR PROGS C:\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"
echo 'ECHO DIR GAMES C:\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"
echo 'ECHO DIR DRIVERS C:\DRIVERS\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"
echo 'ECHO DIR DEVEL C:\DEVEL\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"
for p in $COREPKGS ; do
  cp "$CDROOT/$p.svp" "$DOSEMUDIR/"
  echo "pkg install $p.svp" >> "$DOSEMUDIR/install.bat"
  echo "del $p.svp" >> "$DOSEMUDIR/install.bat"
done
echo 'ECHO my_ip = dhcp >> %DOSDIR%\CFG\WATTCP.CFG' >> "$DOSEMUDIR/install.bat"
echo 'del pkg.exe' >> "$DOSEMUDIR/install.bat"
echo 'DEL C:\CONFIG.SYS' >> "$DOSEMUDIR/install.bat"
echo 'COPY C:\CONFIG.NEW C:\CONFIG.SYS' >> "$DOSEMUDIR/install.bat"
echo 'DEL C:\CONFIG.NEW' >> "$DOSEMUDIR/install.bat"
echo 'SET COMSPEC=C:\COMMAND.COM' >> "$DOSEMUDIR/install.bat"
echo 'DEL C:\CMD.COM' >> "$DOSEMUDIR/install.bat"
echo 'ECHO.' >> "$DOSEMUDIR/install.bat"
echo 'ECHO -------------------------' >> "$DOSEMUDIR/install.bat"
echo 'ECHO  SVARDOS SETUP COMPLETED' >> "$DOSEMUDIR/install.bat"
echo 'ECHO   PLEASE RESTART DOSEMU' >> "$DOSEMUDIR/install.bat"
echo 'ECHO -------------------------' >> "$DOSEMUDIR/install.bat"
echo 'ECHO.' >> "$DOSEMUDIR/install.bat"
unzip -Cj "$REPOROOTCORE/kernel.svp" bin/kernel.sys -d "$DOSEMUDIR/"
unzip -CLj "$REPOROOTCORE/svarcom.svp" command.com -d "$DOSEMUDIR/"
mv "$DOSEMUDIR/command.com" "$DOSEMUDIR/cmd.com"
unzip -Cj "$REPOROOTCORE/pkg.svp" bin/pkg.exe -d "$DOSEMUDIR/"
# CONFIG.SYS
echo 'FILES=25' >> "$DOSEMUDIR/config.sys"
echo 'DOS=HIGH,UMB' >> "$DOSEMUDIR/config.sys"
echo 'DOSDATA=UMB' >> "$DOSEMUDIR/config.sys"
echo 'DEVICE=D:\dosemu\emufs.sys' >> "$DOSEMUDIR/config.sys"
echo 'DEVICE=D:\dosemu\umb.sys' >> "$DOSEMUDIR/config.sys"
echo 'DEVICEHIGH=D:\dosemu\ems.sys' >> "$DOSEMUDIR/config.sys"
echo 'INSTALL=D:\dosemu\emufs.com' >> "$DOSEMUDIR/config.sys"
cp "$DOSEMUDIR/config.sys" "$DOSEMUDIR/config.new"
echo 'SHELL=C:\CMD.COM /P' >> "$DOSEMUDIR/config.sys"
echo 'SHELL=C:\COMMAND.COM /P' >> "$DOSEMUDIR/config.new"
# AUTOEXEC.BAT
echo "@ECHO OFF" >> "$DOSEMUDIR/autoexec.bat"
echo 'SET DOSDIR=C:\SVARDOS' >> "$DOSEMUDIR/autoexec.bat"
echo 'SET WATTCP.CFG=%DOSDIR%\CFG' >> "$DOSEMUDIR/autoexec.bat"
echo 'SET DIRCMD=/p/ogne' >> "$DOSEMUDIR/autoexec.bat"
echo 'SET TEMP=C:\TEMP' >> "$DOSEMUDIR/autoexec.bat"
echo 'PATH %DOSDIR%\BIN' >> "$DOSEMUDIR/autoexec.bat"
echo "" >> "$DOSEMUDIR/autoexec.bat"
echo 'IF NOT EXIST INSTALL.BAT GOTO NORMBOOT' >> "$DOSEMUDIR/autoexec.bat"
echo "REM *** this is a one-time setup script used only during first initialization ***" >> "$DOSEMUDIR/autoexec.bat"
echo 'CALL INSTALL.BAT' >> "$DOSEMUDIR/autoexec.bat"
echo 'DEL INSTALL.BAT' >> "$DOSEMUDIR/autoexec.bat"
echo 'GOTO ENDOFFILE' >> "$DOSEMUDIR/autoexec.bat"
echo "" >> "$DOSEMUDIR/autoexec.bat"
echo ":NORMBOOT" >> "$DOSEMUDIR/autoexec.bat"
echo "ECHO." >> "$DOSEMUDIR/autoexec.bat"
echo "ECHO Welcome to SvarDOS (powered by DOSEMU)! Type HELP if you are lost." >> "$DOSEMUDIR/autoexec.bat"
echo "ECHO." >> "$DOSEMUDIR/autoexec.bat"
echo ":ENDOFFILE" >> "$DOSEMUDIR/autoexec.bat"
rm -f "$PUBDIR/svardos-dosemu.zip"
zip -rm9jk "$PUBDIR/svardos-$CURDATE-dosemu.zip" "$DOSEMUDIR"
rmdir "$DOSEMUDIR"
 
echo
echo "### Generating ISO CD image"
echo
 
CDISO="$PUBDIR/svardos-$CURDATE-cd.iso"
CDZIP="$PUBDIR/svardos-$CURDATE-cd.zip"
 
$GENISOIMAGE -input-charset cp437 -b boot.img -iso-level 1 -f -V SVARDOS -o "$CDISO" "$CDROOT/boot.img"
 
# compress the ISO
zip -mj9 "$CDZIP" "$CDISO"
 
 
###############################################################################
# remove internationalization files for EN-ONLY releases. This is the only    #
# way to build the 360K variant                                               #
###############################################################################
 
rm "$FLOPROOT"/*.cpx
rm "$FLOPROOT"/install.lng
rm "$FLOPROOT"/display.exe
rm "$FLOPROOT"/mode.com
 
###############################################################################
# remove NLS and LNG files from packages to build EN-ONLY builds              #
###############################################################################
 
echo "### remove NLS and LNG files from packages to build EN-ONLY builds"
for p in $COREPKGS ; do
  # the || true bit is because zip returns a non-zero exit code on no file match
  zip -dq "$CDROOT/$p.svp" 'bin/*.lng' 'BIN/*.LNG' 'nls/*' 'NLS/*' || true
done
 
prep_flop 80 2 18 1440 "$PUBDIR" "1.44M-EN_ONLY"
#prep_flop 80 2 21 1680 "$PUBDIR" "1.44M-DMF-EN_ONLY"
prep_flop 80 2 15 1200 "$PUBDIR" "1.2M-EN_ONLY"
prep_flop 80 2  9  720 "$PUBDIR" "720K-EN_ONLY"
prep_flop 40 2  9  360 "$PUBDIR" "360K-EN_ONLY"
 
 
###############################################################################
# cleanup all temporary things                                                #
###############################################################################
 
if [ "x$2" != "xnoclean" ] ; then
  echo
  echo "### Cleanup of temporary directories:"
  echo "# $CDROOT"
  echo "# $FLOPROOT"
  echo
  rm -rf "$CDROOT" "$FLOPROOT"
fi
 
cd "$origdir"
 
echo
echo "### ALL DONE! ###"
 
exit 0
 

Rev 1528	Rev 1616
1	`#!/bin/bash`	1	`#!/bin/bash`
2	`#`	2	`#`
3	`# SvarDOS build script`	3	`# SvarDOS build script`
4	`# http://svardos.org`	4	`# http://svardos.org`
5	`# Copyright (C) 2016-2023 Mateusz Viste`	5	`# Copyright (C) 2016-2023 Mateusz Viste`
6	`#`	6	`#`
7	`# This script builds floppy and CD images. It should be executed each time that`	7	`# This script builds floppy and CD images. It should be executed each time that`
8	`# a CORE package has been modified or the build script changed. This is usually`	8	`# a CORE package has been modified or the build script changed. This is usually`
9	`# done by the cron.sh script, itself called by a cron job.`	9	`# done by the cron.sh script, itself called by a cron job.`
10	`#`	10	`#`
11	`# usage: ./build.sh outputdir buildver [noclean] > logfile`	11	`# usage: ./build.sh outputdir buildver [noclean] > logfile`
12	`#`	12	`#`
13		13
14	`### parameters block starts here ############################################`	14	`### parameters block starts here ############################################`
15		15
16	REPOROOT=`realpath ./packages`	16	REPOROOT=`realpath ./packages`
17	REPOROOTCORE=`realpath ./packages-core`	17	REPOROOTCORE=`realpath ./packages-core`
18	CUSTFILES=`realpath ./files`	18	CUSTFILES=`realpath ./files`
19		19
20	`GENISOIMAGE='' # can be mkisofs, genisoimage or empty for autodetection`	20	`GENISOIMAGE='' # can be mkisofs, genisoimage or empty for autodetection`
21		21
22	`### parameters block ends here ##############################################`	22	`### parameters block ends here ##############################################`
23		23
24	`# look for mandatory output dir and build id`	24	`# look for mandatory output dir and build id`
25	`if [ "x$2" == "x" ] ; then`	25	`if [ "x$2" == "x" ] ; then`
26	`echo "usage: build.sh outputdir buildver [noclean]"`	26	`echo "usage: build.sh outputdir buildver [noclean]"`
27	`exit 1`	27	`exit 1`
28	`fi`	28	`fi`
29	`CURDATE="$2"`	29	`CURDATE="$2"`
30	PUBDIR=`realpath "$1"`	30	PUBDIR=`realpath "$1"`
31		31
32	`CDROOT="$PUBDIR/tmp_cdroot.build"`	32	`CDROOT="$PUBDIR/tmp_cdroot.build"`
33	`FLOPROOT="$PUBDIR/tmp_floproot.build"`	33	`FLOPROOT="$PUBDIR/tmp_floproot.build"`
34		34
35		35
36	`# auto-detect whether to use mkisofs or genisoimage`	36	`# auto-detect whether to use mkisofs or genisoimage`
37		37
38	`if [ "x$GENISOIMAGE" == "x" ] ; then`	38	`if [ "x$GENISOIMAGE" == "x" ] ; then`
39	`mkisofs --help 2> /dev/null`	39	`mkisofs --help 2> /dev/null`
40	`if [ $? -eq 0 ] ; then`	40	`if [ $? -eq 0 ] ; then`
41	`GENISOIMAGE='mkisofs'`	41	`GENISOIMAGE='mkisofs'`
42	`fi`	42	`fi`
43	`fi`	43	`fi`
44		44
45	`if [ "x$GENISOIMAGE" == "x" ] ; then`	45	`if [ "x$GENISOIMAGE" == "x" ] ; then`
46	`genisoimage --help 2> /dev/null`	46	`genisoimage --help 2> /dev/null`
47	`if [ $? -eq 0 ] ; then`	47	`if [ $? -eq 0 ] ; then`
48	`GENISOIMAGE='genisoimage'`	48	`GENISOIMAGE='genisoimage'`
49	`fi`	49	`fi`
50	`fi`	50	`fi`
51		51
52	`if [ "x$GENISOIMAGE" == "x" ] ; then`	52	`if [ "x$GENISOIMAGE" == "x" ] ; then`
53	`echo "ERROR: neither genisoimage nor mkisofs was found on this system"`	53	`echo "ERROR: neither genisoimage nor mkisofs was found on this system"`
54	`exit 1`	54	`exit 1`
55	`fi`	55	`fi`
56		56
57		57
58	`# abort if anything fails`	58	`# abort if anything fails`
59	`set -e`	59	`set -e`
60		60
61		61
62	`# list of packages to be part of CORE (always installed)`	62	`# list of packages to be part of CORE (always installed)`
63	COREPKGS=`ls -1 'packages-core' \| grep -o '^[a-z]*'`	63	COREPKGS=`ls -1 'packages-core' \| grep -o '^[a-z]*'`
64		64
65	`# list of packages to be part of EXTRA (only sometimes installed, typically drivers)`	65	`# list of packages to be part of EXTRA (only sometimes installed, typically drivers)`
66	`EXTRAPKGS="pcntpk udvd2"`	66	`EXTRAPKGS="pcntpk udvd2"`
67		67
68	`# all packages`	68	`# all packages`
69	`ALLPKGS="$COREPKGS $EXTRAPKGS"`	69	`ALLPKGS="$COREPKGS $EXTRAPKGS"`
70		70
71		71
72	`# prepares image for floppy sets of:`	72	`# prepares image for floppy sets of:`
73	`# $1 cylinders`	73	`# $1 cylinders`
74	`# $2 heads (sides)`	74	`# $2 heads (sides)`
75	`# $3 sectors per track`	75	`# $3 sectors per track`
76	`# $4 size`	76	`# $4 size`
77	`# $5 working directory (for temporary files etc)`	77	`# $5 working directory (for temporary files etc)`
78	`# $6 name of the set (eg. "1440k" or "1440k-EN")`	78	`# $6 name of the set (eg. "1440k" or "1440k-EN")`
79	`# $7 where to put a copy of the image (optional)`	79	`# $7 where to put a copy of the image (optional)`
80	`function prep_flop {`	80	`function prep_flop {`
81	`WORKDIR="$5/$6"`	81	`WORKDIR="$5/$6"`
82	`mkdir "$WORKDIR"`	82	`mkdir "$WORKDIR"`
83	`mformat -C -t $1 -h $2 -s $3 -v SVARDOS -B "$CUSTFILES/floppy.mbr" -i "$WORKDIR/disk1.img"`	83	`mformat -C -t $1 -h $2 -s $3 -v SVARDOS -B "$CUSTFILES/floppy.mbr" -i "$WORKDIR/disk1.img"`
84	`mcopy -sQm -i "$WORKDIR/disk1.img" "$FLOPROOT/"* ::/`	84	`mcopy -sQm -i "$WORKDIR/disk1.img" "$FLOPROOT/"* ::/`
85		85
86	`# now populate the floppies`	86	`# now populate the floppies`
87	`curdisk=1`	87	`curdisk=1`
88	`LIST=$ALLPKGS`	88	`LIST=$ALLPKGS`
89		89
90	`while [ ! -z "$LIST" ] ; do`	90	`while [ ! -z "$LIST" ] ; do`
91		91
92	`unset PENDING`	92	`unset PENDING`
93	`for p in $LIST ; do`	93	`for p in $LIST ; do`
94	`# if copy fails, then probably the floppy is full - try other packages`	94	`# if copy fails, then probably the floppy is full - try other packages`
95	`# but remember all that fails so they will be retried on a new floppy`	95	`# but remember all that fails so they will be retried on a new floppy`
96	`if ! mcopy -mi "$WORKDIR/disk$curdisk.img" "$CDROOT/$p.svp" ::/ ; then`	96	`if ! mcopy -mi "$WORKDIR/disk$curdisk.img" "$CDROOT/$p.svp" ::/ ; then`
97	`PENDING="$PENDING $p"`	97	`PENDING="$PENDING $p"`
98	`fi`	98	`fi`
99	`done`	99	`done`
100		100
101	`LIST="$PENDING"`	101	`LIST="$PENDING"`
102	`# if there are any pending items, then create a new floppy and try pushing pending packages to it`	102	`# if there are any pending items, then create a new floppy and try pushing pending packages to it`
103	`if [ ! -z "$PENDING" ] ; then`	103	`if [ ! -z "$PENDING" ] ; then`
104	`curdisk=$((curdisk+1))`	104	`curdisk=$((curdisk+1))`
105	`mformat -C -t $1 -h $2 -s $3 -v SVARDOS -i "$WORKDIR/disk$curdisk.img"`	105	`mformat -C -t $1 -h $2 -s $3 -v SVARDOS -i "$WORKDIR/disk$curdisk.img"`
106	`fi`	106	`fi`
107		107
108	`done`	108	`done`
109		109
110	`# add a short readme`	110	`# add a short readme`
111	`echo "This directory contains a set of $curdisk floppy images of the SvarDOS distribution in the $4 KB floppy format." > "$WORKDIR/readme.txt"`	111	`echo "This directory contains a set of $curdisk floppy images of the SvarDOS distribution in the $4 KB floppy format." > "$WORKDIR/readme.txt"`
112	`echo "" >> "$WORKDIR/readme.txt"`	112	`echo "" >> "$WORKDIR/readme.txt"`
113	`echo "These images are raw floppy disk dumps. To write them on an actual floppy disk, you have to use a low-level sector copying tool, like dd." >> "$WORKDIR/readme.txt"`	113	`echo "These images are raw floppy disk dumps. To write them on an actual floppy disk, you have to use a low-level sector copying tool, like dd." >> "$WORKDIR/readme.txt"`
114	`echo "" >> "$WORKDIR/readme.txt"`	114	`echo "" >> "$WORKDIR/readme.txt"`
115	`echo "Latest SvarDOS version is available on the project's homepage: http://svardos.org" >> "$WORKDIR/readme.txt"`	115	`echo "Latest SvarDOS version is available on the project's homepage: http://svardos.org" >> "$WORKDIR/readme.txt"`
116		116
117	`unix2dos "$WORKDIR/readme.txt"`	117	`unix2dos "$WORKDIR/readme.txt"`
118		118
119	`# make a copy of the image, if requested`	119	`# make a copy of the image, if requested`
120	`if [ "x$7" != "x" ] ; then`	120	`if [ "x$7" != "x" ] ; then`
121	`cp "$WORKDIR/disk1.img" $7`	121	`cp "$WORKDIR/disk1.img" $7`
122	`fi`	122	`fi`
123		123
124	`# zip the images (and remove them at the same time)`	124	`# zip the images (and remove them at the same time)`
125	`zip -9 -rmj "$PUBDIR/svardos-$CURDATE-floppy-$6.zip" "$WORKDIR"/*`	125	`zip -9 -rmj "$PUBDIR/svardos-$CURDATE-floppy-$6.zip" "$WORKDIR"/*`
126		126
127	`# clean up`	127	`# clean up`
128	`rmdir "$WORKDIR"`	128	`rmdir "$WORKDIR"`
129	`}`	129	`}`
130		130
131		131
132	`### actual code flow starts here ############################################`	132	`### actual code flow starts here ############################################`
133		133
134	`# remember where I am, so I can get back here once all is done`	134	`# remember where I am, so I can get back here once all is done`
135	origdir=`pwd`	135	origdir=`pwd`
136		136
137	`echo "###############################################################################"`	137	`echo "###############################################################################"`
138	`echo " STARTING BUILD $CURDATE"`	138	`echo " STARTING BUILD $CURDATE"`
139	`echo "###############################################################################"`	139	`echo "###############################################################################"`
140	`echo "dest dir: $PUBDIR"`	140	`echo "dest dir: $PUBDIR"`
141	echo "current time is `date` and it's a beautiful day somewhere in the world"	141	echo "current time is `date` and it's a beautiful day somewhere in the world"
142	`echo`	142	`echo`
143		143
144	`mkdir "$CDROOT"`	144	`mkdir "$CDROOT"`
145	`mkdir "$FLOPROOT"`	145	`mkdir "$FLOPROOT"`
146		146
147	`# add CORE packages to CDROOT + create the list of packages on floppy`	147	`# add CORE packages to CDROOT + create the list of packages on floppy`
148	`for pkg in $COREPKGS ; do`	148	`for pkg in $COREPKGS ; do`
149	`cp "$REPOROOTCORE/$pkg.svp" "$CDROOT/"`	149	`cp "$REPOROOTCORE/$pkg.svp" "$CDROOT/"`
150	`echo "$pkg" >> "$FLOPROOT/install.lst"`	150	`echo "$pkg" >> "$FLOPROOT/install.lst"`
151	`done`	151	`done`
152		152
153	`# add EXTRA packages to CDROOT (but not in the list of packages to install)`	153	`# add EXTRA packages to CDROOT (but not in the list of packages to install)`
154	`for pkg in $EXTRAPKGS ; do`	154	`for pkg in $EXTRAPKGS ; do`
155	`cp "$REPOROOT/$pkg.svp" "$CDROOT/"`	155	`cp "$REPOROOT/$pkg.svp" "$CDROOT/"`
156	`done`	156	`done`
157		157
158		158
159	`echo`	159	`echo`
160	`echo "### Populating the floppy root at $FLOPROOT"`	160	`echo "### Populating the floppy root at $FLOPROOT"`
161	`echo`	161	`echo`
162		162
163	`# prepare the content of the boot (install) floppy, unzipping everything`	163	`# prepare the content of the boot (install) floppy, unzipping everything`
164	`# in lowercase (-L) to avoid any case mismatching later in the build process`	164	`# in lowercase (-L) to avoid any case mismatching later in the build process`
165	`cp -r "$CUSTFILES/floppy/"* "$FLOPROOT/"`	165	`cp -r "$CUSTFILES/floppy/"* "$FLOPROOT/"`
166	`unzip -CLj "$REPOROOTCORE/cpidos.svp" 'cpi/ega*.cpx' -d "$FLOPROOT/"`	166	`unzip -CLj "$REPOROOTCORE/cpidos.svp" 'cpi/ega*.cpx' -d "$FLOPROOT/"`
167	`unzip -CLj "$REPOROOTCORE/svarcom.svp" command.com -d "$FLOPROOT/"`	167	`unzip -CLj "$REPOROOTCORE/svarcom.svp" command.com -d "$FLOPROOT/"`
168	`unzip -CLj "$REPOROOTCORE/display.svp" bin/display.exe -d "$FLOPROOT/"`	168	`unzip -CLj "$REPOROOTCORE/display.svp" bin/display.exe -d "$FLOPROOT/"`
169	`unzip -CLj "$REPOROOTCORE/fdapm.svp" bin/fdapm.com -d "$FLOPROOT/"`	169	`unzip -CLj "$REPOROOTCORE/fdapm.svp" bin/fdapm.com -d "$FLOPROOT/"`
170	`unzip -CLj "$REPOROOTCORE/fdisk.svp" bin/fdisk.exe -d "$FLOPROOT/"`	170	`unzip -CLj "$REPOROOTCORE/fdisk.svp" bin/fdisk.exe -d "$FLOPROOT/"`
171	`unzip -CLj "$REPOROOTCORE/format.svp" bin/format.exe -d "$FLOPROOT/"`	171	`unzip -CLj "$REPOROOTCORE/format.svp" bin/format.exe -d "$FLOPROOT/"`
172	`unzip -CLj "$REPOROOTCORE/kernel.svp" bin/kernel.sys bin/sys.com -d "$FLOPROOT/"`	172	`unzip -CLj "$REPOROOTCORE/kernel.svp" bin/kernel.sys bin/sys.com -d "$FLOPROOT/"`
173	`unzip -CLj "$REPOROOTCORE/mem.svp" bin/mem.exe -d "$FLOPROOT/"`	173	`unzip -CLj "$REPOROOTCORE/mem.svp" bin/mem.exe -d "$FLOPROOT/"`
174	`unzip -CLj "$REPOROOTCORE/mode.svp" bin/mode.com -d "$FLOPROOT/"`	174	`unzip -CLj "$REPOROOTCORE/mode.svp" bin/mode.com -d "$FLOPROOT/"`
175	`unzip -CLj "$REPOROOTCORE/more.svp" bin/more.com -d "$FLOPROOT/"`	175	`unzip -CLj "$REPOROOTCORE/more.svp" bin/more.com -d "$FLOPROOT/"`
176	`unzip -CLj "$REPOROOTCORE/pkg.svp" bin/pkg.exe -d "$FLOPROOT/"`	176	`unzip -CLj "$REPOROOTCORE/pkg.svp" bin/pkg.exe -d "$FLOPROOT/"`
177	`unzip -CLj "$REPOROOTCORE/sved.svp" bin/sved.com -d "$FLOPROOT/"`	177	`unzip -CLj "$REPOROOTCORE/sved.svp" bin/sved.com -d "$FLOPROOT/"`
178		178
179	`# generate a simple autoexec.bat file`	179	`# generate a simple autoexec.bat file`
180	`echo '@ECHO OFF' > "$FLOPROOT/autoexec.bat"`	180	`echo '@ECHO OFF' > "$FLOPROOT/autoexec.bat"`
181	`echo '' >> "$FLOPROOT/autoexec.bat"`	181	`echo '' >> "$FLOPROOT/autoexec.bat"`
182	`echo 'REM Load DISPLAY driver if present' >> "$FLOPROOT/autoexec.bat"`	182	`echo 'REM Load DISPLAY driver if present' >> "$FLOPROOT/autoexec.bat"`
183	`echo 'IF EXIST DISPLAY.EXE DISPLAY CON=(EGA,,1)' >> "$FLOPROOT/autoexec.bat"`	183	`echo 'IF EXIST DISPLAY.EXE DISPLAY CON=(EGA,,1)' >> "$FLOPROOT/autoexec.bat"`
184	`echo '' >> "$FLOPROOT/autoexec.bat"`	184	`echo '' >> "$FLOPROOT/autoexec.bat"`
185	`echo 'FDAPM APMDOS' >> "$FLOPROOT/autoexec.bat"`	185	`echo 'FDAPM APMDOS' >> "$FLOPROOT/autoexec.bat"`
186	`echo '' >> "$FLOPROOT/autoexec.bat"`	186	`echo '' >> "$FLOPROOT/autoexec.bat"`
187	`echo 'ECHO.' >> "$FLOPROOT/autoexec.bat"`	187	`echo 'ECHO.' >> "$FLOPROOT/autoexec.bat"`
188	`echo 'ECHO ********************' >> "$FLOPROOT/autoexec.bat"`	188	`echo 'ECHO ********************' >> "$FLOPROOT/autoexec.bat"`
189	`echo 'ECHO WELCOME TO SVARDOS' >> "$FLOPROOT/autoexec.bat"`	189	`echo 'ECHO WELCOME TO SVARDOS' >> "$FLOPROOT/autoexec.bat"`
190	`echo 'ECHO ********************' >> "$FLOPROOT/autoexec.bat"`	190	`echo 'ECHO ********************' >> "$FLOPROOT/autoexec.bat"`
191	`echo "ECHO build: $CURDATE" >> "$FLOPROOT/autoexec.bat"`	191	`echo "ECHO build: $CURDATE" >> "$FLOPROOT/autoexec.bat"`
192	`echo 'ECHO.' >> "$FLOPROOT/autoexec.bat"`	192	`echo 'ECHO.' >> "$FLOPROOT/autoexec.bat"`
193	`echo '' >> "$FLOPROOT/autoexec.bat"`	193	`echo '' >> "$FLOPROOT/autoexec.bat"`
194	`echo "INSTALL $CURDATE" >> "$FLOPROOT/autoexec.bat"`	194	`echo "INSTALL $CURDATE" >> "$FLOPROOT/autoexec.bat"`
195	`unix2dos "$FLOPROOT/autoexec.bat"`	195	`unix2dos "$FLOPROOT/autoexec.bat"`
196		196
197		197
198	`echo`	198	`echo`
199	`echo "### Computing the USB image"`	199	`echo "### Computing the USB image"`
200	`echo`	200	`echo`
201		201
202	`# prepare the USB bootable image`	202	`# prepare the USB bootable image`
203	`USBIMG=$PUBDIR/svardos-usb.img`	203	`USBIMG=$PUBDIR/svardos-usb.img`
204	`cp files/boot-svardos.img $USBIMG`	204	`cp files/boot-svardos.img $USBIMG`
205	`mcopy -sQm -i "$USBIMG@@32256" "$FLOPROOT/"* ::/`	205	`mcopy -sQm -i "$USBIMG@@32256" "$FLOPROOT/"* ::/`
206	`for p in $ALLPKGS ; do`	206	`for p in $ALLPKGS ; do`
207	`mcopy -mi "$USBIMG@@32256" "$CDROOT/$p.svp" ::/`	207	`mcopy -mi "$USBIMG@@32256" "$CDROOT/$p.svp" ::/`
208	`done`	208	`done`
209		209
210	`# compress the USB image`	210	`# compress the USB image`
211	`zip -mj9 "$PUBDIR/svardos-$CURDATE-usb.zip" "$USBIMG"`	211	`zip -mj9 "$PUBDIR/svardos-$CURDATE-usb.zip" "$USBIMG"`
212		212
213		213
214	`echo`	214	`echo`
215	`echo "### Creating floppy images"`	215	`echo "### Creating floppy images"`
216	`echo`	216	`echo`
217	`echo "You might notice a lot of DISK FULL warnings below. Do not worry, these"`	217	`echo "You might notice a lot of DISK FULL warnings below. Do not worry, these"`
218	`echo "are expected and are perfectly normal. It is a side effect of trying to"`	218	`echo "are expected and are perfectly normal. It is a side effect of trying to"`
219	`echo "fit as many packages as possible on the floppy sets."`	219	`echo "fit as many packages as possible on the floppy sets."`
220	`echo`	220	`echo`
221		221
222	`# build the boot (CD) floppy image`	222	`# build the boot (CD) floppy image`
223	`export MTOOLS_NO_VFAT=1`	223	`export MTOOLS_NO_VFAT=1`
224		224
225	`# prepare images for floppies in different sizes (args are C H S SIZE)`	225	`# prepare images for floppies in different sizes (args are C H S SIZE)`
226	`prep_flop 80 2 36 2880 "$PUBDIR" "2.88M" "$CDROOT/boot.img"`	226	`prep_flop 80 2 36 2880 "$PUBDIR" "2.88M" "$CDROOT/boot.img"`
227	`prep_flop 80 2 18 1440 "$PUBDIR" "1.44M"`	227	`prep_flop 80 2 18 1440 "$PUBDIR" "1.44M"`
228	`prep_flop 80 2 15 1200 "$PUBDIR" "1.2M"`	228	`prep_flop 80 2 15 1200 "$PUBDIR" "1.2M"`
229	`prep_flop 80 2 9 720 "$PUBDIR" "720K"`	229	`prep_flop 80 2 9 720 "$PUBDIR" "720K"`
230		230
231	`# remove internationalization files for EN-ONLY releases. This is the only way`	-
232	`# to build the 360K variant`	-
233	`rm "$FLOPROOT"/*.cpx`	-
234	`rm "$FLOPROOT"/install.lng`	-
235	`rm "$FLOPROOT"/display.exe`	-
236	`rm "$FLOPROOT"/mode.com`	-
237	`#`	-
238		-
239	`# disabling EN-ONLY builds of 1.4M, 1.2M and 720K because EN-ONLY does not`	-
240	`# decrease the amount of diskettes at this moment.`	-
241	`#prep_flop 80 2 18 1440 "$PUBDIR" "1.44M-EN_ONLY"`	-
242	`prep_flop 80 2 21 1680 "$PUBDIR" "1.44M-DMF-EN_ONLY"`	-
243	`#prep_flop 80 2 15 1200 "$PUBDIR" "1.2M-EN_ONLY"`	-
244	`#prep_flop 80 2 9 720 "$PUBDIR" "720K-EN_ONLY"`	-
245	`prep_flop 40 2 9 360 "$PUBDIR" "360K-EN_ONLY"`	-
246		-
247		231
248	`echo`	232	`echo`
249	`echo "### Computing DOSEMU.zip"`	233	`echo "### Computing DOSEMU.zip"`
250	`echo`	234	`echo`
251		235
252	`# prepare the DOSEMU boot zip`	236	`# prepare the DOSEMU boot zip`
253	`DOSEMUDIR="$PUBDIR/tmp_dosemu-prep-files.build"`	237	`DOSEMUDIR="$PUBDIR/tmp_dosemu-prep-files.build"`
254	`mkdir "$DOSEMUDIR"`	238	`mkdir "$DOSEMUDIR"`
255	`# INSTALL.BAT`	239	`# INSTALL.BAT`
256	`echo 'IF NOT EXIST C:\TEMP\NUL MKDIR C:\TEMP' >> "$DOSEMUDIR/install.bat"`	240	`echo 'IF NOT EXIST C:\TEMP\NUL MKDIR C:\TEMP' >> "$DOSEMUDIR/install.bat"`
257	`echo 'mkdir %DOSDIR%' >> "$DOSEMUDIR/install.bat"`	241	`echo 'mkdir %DOSDIR%' >> "$DOSEMUDIR/install.bat"`
258	`echo 'mkdir %DOSDIR%\cfg' >> "$DOSEMUDIR/install.bat"`	242	`echo 'mkdir %DOSDIR%\cfg' >> "$DOSEMUDIR/install.bat"`
259	`echo 'ECHO # pkg config file - specifies locations where packages should be installed >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"`	243	`echo 'ECHO # pkg config file - specifies locations where packages should be installed >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"`
260	`echo 'ECHO DIR PROGS C:\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"`	244	`echo 'ECHO DIR PROGS C:\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"`
261	`echo 'ECHO DIR GAMES C:\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"`	245	`echo 'ECHO DIR GAMES C:\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"`
262	`echo 'ECHO DIR DRIVERS C:\DRIVERS\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"`	246	`echo 'ECHO DIR DRIVERS C:\DRIVERS\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"`
263	`echo 'ECHO DIR DEVEL C:\DEVEL\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"`	247	`echo 'ECHO DIR DEVEL C:\DEVEL\ >> %DOSDIR%\cfg\pkg.cfg' >> "$DOSEMUDIR/install.bat"`
264	`for p in $COREPKGS ; do`	248	`for p in $COREPKGS ; do`
265	`cp "$CDROOT/$p.svp" "$DOSEMUDIR/"`	249	`cp "$CDROOT/$p.svp" "$DOSEMUDIR/"`
266	`echo "pkg install $p.svp" >> "$DOSEMUDIR/install.bat"`	250	`echo "pkg install $p.svp" >> "$DOSEMUDIR/install.bat"`
267	`echo "del $p.svp" >> "$DOSEMUDIR/install.bat"`	251	`echo "del $p.svp" >> "$DOSEMUDIR/install.bat"`
268	`done`	252	`done`
269	`echo 'ECHO my_ip = dhcp >> %DOSDIR%\CFG\WATTCP.CFG' >> "$DOSEMUDIR/install.bat"`	253	`echo 'ECHO my_ip = dhcp >> %DOSDIR%\CFG\WATTCP.CFG' >> "$DOSEMUDIR/install.bat"`
270	`echo 'del pkg.exe' >> "$DOSEMUDIR/install.bat"`	254	`echo 'del pkg.exe' >> "$DOSEMUDIR/install.bat"`
271	`echo 'DEL C:\CONFIG.SYS' >> "$DOSEMUDIR/install.bat"`	255	`echo 'DEL C:\CONFIG.SYS' >> "$DOSEMUDIR/install.bat"`
272	`echo 'COPY C:\CONFIG.NEW C:\CONFIG.SYS' >> "$DOSEMUDIR/install.bat"`	256	`echo 'COPY C:\CONFIG.NEW C:\CONFIG.SYS' >> "$DOSEMUDIR/install.bat"`
273	`echo 'DEL C:\CONFIG.NEW' >> "$DOSEMUDIR/install.bat"`	257	`echo 'DEL C:\CONFIG.NEW' >> "$DOSEMUDIR/install.bat"`
274	`echo 'SET COMSPEC=C:\COMMAND.COM' >> "$DOSEMUDIR/install.bat"`	258	`echo 'SET COMSPEC=C:\COMMAND.COM' >> "$DOSEMUDIR/install.bat"`
275	`echo 'DEL C:\CMD.COM' >> "$DOSEMUDIR/install.bat"`	259	`echo 'DEL C:\CMD.COM' >> "$DOSEMUDIR/install.bat"`
276	`echo 'ECHO.' >> "$DOSEMUDIR/install.bat"`	260	`echo 'ECHO.' >> "$DOSEMUDIR/install.bat"`
277	`echo 'ECHO -------------------------' >> "$DOSEMUDIR/install.bat"`	261	`echo 'ECHO -------------------------' >> "$DOSEMUDIR/install.bat"`
278	`echo 'ECHO SVARDOS SETUP COMPLETED' >> "$DOSEMUDIR/install.bat"`	262	`echo 'ECHO SVARDOS SETUP COMPLETED' >> "$DOSEMUDIR/install.bat"`
279	`echo 'ECHO PLEASE RESTART DOSEMU' >> "$DOSEMUDIR/install.bat"`	263	`echo 'ECHO PLEASE RESTART DOSEMU' >> "$DOSEMUDIR/install.bat"`
280	`echo 'ECHO -------------------------' >> "$DOSEMUDIR/install.bat"`	264	`echo 'ECHO -------------------------' >> "$DOSEMUDIR/install.bat"`
281	`echo 'ECHO.' >> "$DOSEMUDIR/install.bat"`	265	`echo 'ECHO.' >> "$DOSEMUDIR/install.bat"`
282	`unzip -Cj "$REPOROOTCORE/kernel.svp" bin/kernel.sys -d "$DOSEMUDIR/"`	266	`unzip -Cj "$REPOROOTCORE/kernel.svp" bin/kernel.sys -d "$DOSEMUDIR/"`
283	`unzip -CLj "$REPOROOTCORE/svarcom.svp" command.com -d "$DOSEMUDIR/"`	267	`unzip -CLj "$REPOROOTCORE/svarcom.svp" command.com -d "$DOSEMUDIR/"`
284	`mv "$DOSEMUDIR/command.com" "$DOSEMUDIR/cmd.com"`	268	`mv "$DOSEMUDIR/command.com" "$DOSEMUDIR/cmd.com"`
285	`unzip -Cj "$REPOROOTCORE/pkg.svp" bin/pkg.exe -d "$DOSEMUDIR/"`	269	`unzip -Cj "$REPOROOTCORE/pkg.svp" bin/pkg.exe -d "$DOSEMUDIR/"`
286	`# CONFIG.SYS`	270	`# CONFIG.SYS`
287	`echo 'FILES=25' >> "$DOSEMUDIR/config.sys"`	271	`echo 'FILES=25' >> "$DOSEMUDIR/config.sys"`
288	`echo 'DOS=HIGH,UMB' >> "$DOSEMUDIR/config.sys"`	272	`echo 'DOS=HIGH,UMB' >> "$DOSEMUDIR/config.sys"`
289	`echo 'DOSDATA=UMB' >> "$DOSEMUDIR/config.sys"`	273	`echo 'DOSDATA=UMB' >> "$DOSEMUDIR/config.sys"`
290	`echo 'DEVICE=D:\dosemu\emufs.sys' >> "$DOSEMUDIR/config.sys"`	274	`echo 'DEVICE=D:\dosemu\emufs.sys' >> "$DOSEMUDIR/config.sys"`
291	`echo 'DEVICE=D:\dosemu\umb.sys' >> "$DOSEMUDIR/config.sys"`	275	`echo 'DEVICE=D:\dosemu\umb.sys' >> "$DOSEMUDIR/config.sys"`
292	`echo 'DEVICEHIGH=D:\dosemu\ems.sys' >> "$DOSEMUDIR/config.sys"`	276	`echo 'DEVICEHIGH=D:\dosemu\ems.sys' >> "$DOSEMUDIR/config.sys"`
293	`echo 'INSTALL=D:\dosemu\emufs.com' >> "$DOSEMUDIR/config.sys"`	277	`echo 'INSTALL=D:\dosemu\emufs.com' >> "$DOSEMUDIR/config.sys"`
294	`cp "$DOSEMUDIR/config.sys" "$DOSEMUDIR/config.new"`	278	`cp "$DOSEMUDIR/config.sys" "$DOSEMUDIR/config.new"`
295	`echo 'SHELL=C:\CMD.COM /P' >> "$DOSEMUDIR/config.sys"`	279	`echo 'SHELL=C:\CMD.COM /P' >> "$DOSEMUDIR/config.sys"`
296	`echo 'SHELL=C:\COMMAND.COM /P' >> "$DOSEMUDIR/config.new"`	280	`echo 'SHELL=C:\COMMAND.COM /P' >> "$DOSEMUDIR/config.new"`
297	`# AUTOEXEC.BAT`	281	`# AUTOEXEC.BAT`
298	`echo "@ECHO OFF" >> "$DOSEMUDIR/autoexec.bat"`	282	`echo "@ECHO OFF" >> "$DOSEMUDIR/autoexec.bat"`
299	`echo 'SET DOSDIR=C:\SVARDOS' >> "$DOSEMUDIR/autoexec.bat"`	283	`echo 'SET DOSDIR=C:\SVARDOS' >> "$DOSEMUDIR/autoexec.bat"`
300	`echo 'SET WATTCP.CFG=%DOSDIR%\CFG' >> "$DOSEMUDIR/autoexec.bat"`	284	`echo 'SET WATTCP.CFG=%DOSDIR%\CFG' >> "$DOSEMUDIR/autoexec.bat"`
301	`echo 'SET DIRCMD=/p/ogne' >> "$DOSEMUDIR/autoexec.bat"`	285	`echo 'SET DIRCMD=/p/ogne' >> "$DOSEMUDIR/autoexec.bat"`
302	`echo 'SET TEMP=C:\TEMP' >> "$DOSEMUDIR/autoexec.bat"`	286	`echo 'SET TEMP=C:\TEMP' >> "$DOSEMUDIR/autoexec.bat"`
303	`echo 'PATH %DOSDIR%\BIN' >> "$DOSEMUDIR/autoexec.bat"`	287	`echo 'PATH %DOSDIR%\BIN' >> "$DOSEMUDIR/autoexec.bat"`
304	`echo "" >> "$DOSEMUDIR/autoexec.bat"`	288	`echo "" >> "$DOSEMUDIR/autoexec.bat"`
305	`echo 'IF NOT EXIST INSTALL.BAT GOTO NORMBOOT' >> "$DOSEMUDIR/autoexec.bat"`	289	`echo 'IF NOT EXIST INSTALL.BAT GOTO NORMBOOT' >> "$DOSEMUDIR/autoexec.bat"`
306	`echo "REM * this is a one-time setup script used only during first initialization *" >> "$DOSEMUDIR/autoexec.bat"`	290	`echo "REM * this is a one-time setup script used only during first initialization *" >> "$DOSEMUDIR/autoexec.bat"`
307	`echo 'CALL INSTALL.BAT' >> "$DOSEMUDIR/autoexec.bat"`	291	`echo 'CALL INSTALL.BAT' >> "$DOSEMUDIR/autoexec.bat"`
308	`echo 'DEL INSTALL.BAT' >> "$DOSEMUDIR/autoexec.bat"`	292	`echo 'DEL INSTALL.BAT' >> "$DOSEMUDIR/autoexec.bat"`
309	`echo 'GOTO ENDOFFILE' >> "$DOSEMUDIR/autoexec.bat"`	293	`echo 'GOTO ENDOFFILE' >> "$DOSEMUDIR/autoexec.bat"`
310	`echo "" >> "$DOSEMUDIR/autoexec.bat"`	294	`echo "" >> "$DOSEMUDIR/autoexec.bat"`
311	`echo ":NORMBOOT" >> "$DOSEMUDIR/autoexec.bat"`	295	`echo ":NORMBOOT" >> "$DOSEMUDIR/autoexec.bat"`
312	`echo "ECHO." >> "$DOSEMUDIR/autoexec.bat"`	296	`echo "ECHO." >> "$DOSEMUDIR/autoexec.bat"`
313	`echo "ECHO Welcome to SvarDOS (powered by DOSEMU)! Type HELP if you are lost." >> "$DOSEMUDIR/autoexec.bat"`	297	`echo "ECHO Welcome to SvarDOS (powered by DOSEMU)! Type HELP if you are lost." >> "$DOSEMUDIR/autoexec.bat"`
314	`echo "ECHO." >> "$DOSEMUDIR/autoexec.bat"`	298	`echo "ECHO." >> "$DOSEMUDIR/autoexec.bat"`
315	`echo ":ENDOFFILE" >> "$DOSEMUDIR/autoexec.bat"`	299	`echo ":ENDOFFILE" >> "$DOSEMUDIR/autoexec.bat"`
316	`rm -f "$PUBDIR/svardos-dosemu.zip"`	300	`rm -f "$PUBDIR/svardos-dosemu.zip"`
317	`zip -rm9jk "$PUBDIR/svardos-$CURDATE-dosemu.zip" "$DOSEMUDIR"`	301	`zip -rm9jk "$PUBDIR/svardos-$CURDATE-dosemu.zip" "$DOSEMUDIR"`
318	`rmdir "$DOSEMUDIR"`	302	`rmdir "$DOSEMUDIR"`
319		303
320	`echo`	304	`echo`
321	`echo "### Generating ISO CD image"`	305	`echo "### Generating ISO CD image"`
322	`echo`	306	`echo`
323		307
324	`CDISO="$PUBDIR/svardos-$CURDATE-cd.iso"`	308	`CDISO="$PUBDIR/svardos-$CURDATE-cd.iso"`
325	`CDZIP="$PUBDIR/svardos-$CURDATE-cd.zip"`	309	`CDZIP="$PUBDIR/svardos-$CURDATE-cd.zip"`
326		310
327	`$GENISOIMAGE -input-charset cp437 -b boot.img -iso-level 1 -f -V SVARDOS -o "$CDISO" "$CDROOT/boot.img"`	311	`$GENISOIMAGE -input-charset cp437 -b boot.img -iso-level 1 -f -V SVARDOS -o "$CDISO" "$CDROOT/boot.img"`
328		312
329	`# compress the ISO`	313	`# compress the ISO`
330	`zip -mj9 "$CDZIP" "$CDISO"`	314	`zip -mj9 "$CDZIP" "$CDISO"`
331		315
-		316
-		317	`###############################################################################`
-		318	`# remove internationalization files for EN-ONLY releases. This is the only #`
-		319	`# way to build the 360K variant #`
-		320	`###############################################################################`
-		321
-		322	`rm "$FLOPROOT"/*.cpx`
332	`# cleanup temporary things`	323	`rm "$FLOPROOT"/install.lng`
-		324	`rm "$FLOPROOT"/display.exe`
-		325	`rm "$FLOPROOT"/mode.com`
-		326
-		327	`###############################################################################`
-		328	`# remove NLS and LNG files from packages to build EN-ONLY builds #`
-		329	`###############################################################################`
-		330
-		331	`echo "### remove NLS and LNG files from packages to build EN-ONLY builds"`
-		332	`for p in $COREPKGS ; do`
-		333	`# the \|\| true bit is because zip returns a non-zero exit code on no file match`
-		334	`zip -dq "$CDROOT/$p.svp" 'bin/.lng' 'BIN/.LNG' 'nls/' 'NLS/' \|\| true`
-		335	`done`
-		336
-		337	`prep_flop 80 2 18 1440 "$PUBDIR" "1.44M-EN_ONLY"`
-		338	`#prep_flop 80 2 21 1680 "$PUBDIR" "1.44M-DMF-EN_ONLY"`
-		339	`prep_flop 80 2 15 1200 "$PUBDIR" "1.2M-EN_ONLY"`
-		340	`prep_flop 80 2 9 720 "$PUBDIR" "720K-EN_ONLY"`
-		341	`prep_flop 40 2 9 360 "$PUBDIR" "360K-EN_ONLY"`
-		342
-		343
-		344	`###############################################################################`
-		345	`# cleanup all temporary things #`
-		346	`###############################################################################`
-		347
333	`if [ "x$2" != "xnoclean" ] ; then`	348	`if [ "x$2" != "xnoclean" ] ; then`
334	`echo`	349	`echo`
335	`echo "### Cleanup of temporary directories:"`	350	`echo "### Cleanup of temporary directories:"`
336	`echo "# $CDROOT"`	351	`echo "# $CDROOT"`
337	`echo "# $FLOPROOT"`	352	`echo "# $FLOPROOT"`
338	`echo`	353	`echo`
339	`rm -rf "$CDROOT" "$FLOPROOT"`	354	`rm -rf "$CDROOT" "$FLOPROOT"`
340	`fi`	355	`fi`
341		356
342	`cd "$origdir"`	357	`cd "$origdir"`
343		358
344	`echo`	359	`echo`
345	`echo "### ALL DONE! ###"`	360	`echo "### ALL DONE! ###"`
346		361
347	`exit 0`	362	`exit 0`
348		363

Subversion Repositories SvarDOS

(root)/build.sh @ 165 – Rev 1528 → 1616