| 10,7 → 10,57 |
|---|
| 0.2:Invalid switch |
| 0.3:Invalid parameter format |
| 0.4:Too many parameters |
| 0.5:Bad command or file name |
| 0.6:Invalid parameter |
| 0.7:Required parameter missing |
| |
| # SVARCOM HELP SCREEN |
| 1.0:Starts the SvarCOM command interpreter |
| 1.1:COMMAND /E:nnn [/[C|K] [/P] [/D] command] |
| 1.2:/D Skip AUTOEXEC.BAT processing (makes sense only with /P) |
| 1.3:/E:nnn Sets the environment size to nnn bytes |
| 1.4:/P Makes the new command interpreter permanent and run AUTOEXEC.BAT |
| 1.5:/C Executes the specified command and returns |
| 1.6:/K Executes the specified command and continues running |
| |
| # VARIOUS SVARCOM MESSAGES |
| 2.0:SVARCOM VERSION CHANGED. SYSTEM HALTED. PLEASE REBOOT YOUR COMPUTER. |
| 2.1:FATAL ERROR: rmod_install() failed |
| 2.2:SvarCOM: stack overflow detected, command history flushed (this is not a bug) |
| |
| # CLS |
| 10.0:Clears the screen |
| |
| # CHCP |
| 11.0:Displays or sets the active code page number. |
| 11.1:CHCP [nnn] |
| 11.2:nnn Specifies a code page number |
| 11.3:Type CHCP without a parameter to display the active code page number. |
| 11.4:Invalid code page number |
| 11.5:NLSFUNC not installed |
| 11.6:Failed to change code page |
| 11.7:Active code page: |
| |
| # CD / CHDIR |
| 12.0:Displays the name of or changes the current directory. |
| 12.1:CHDIR [drive:][path] |
| 12.2:CHDIR[..] |
| 12.3:CD [drive:][path] |
| 12.4:CD[..] |
| 12.5:.. Specifies that you want to change to the parent directory. |
| 12.6:Type CD drive: to display the current directory in the specified drive. |
| 12.7:Type CD without parameters to display the current drive and directory. |
| |
| # CALL |
| 13.0:Calls one batch program from another |
| 13.1:CALL [drive:][path]filename [batch-parameters] |
| |
| # BREAK |
| 14.0:Sets or clears extended CTRL+C checking |
| 14.1:Type BREAK without a parameter to display the current BREAK setting. |
| 14.2:BREAK is off |
| 14.3:BREAK is on |
| |
| # PAUSE |
| 15.0:Suspends the execution of a batch script |
| 15.1:Press any key to continue... |
| 35,6 → 85,98 |
|---|
| 18.5:parameters parameters or switches for the specified command. |
| 18.6:To use FOR in a batch program, use %%variable instead of %variable. |
| |
| # VERIFY |
| 19.0:Tells DOS whether to verify that files are written correctly to disk. |
| 19.1:Type VERIFY without a parameter to display its current setting. |
| 19.2:VERIFY is off |
| 19.3:VERIFY is on |
| 19.4:Must specify ON or OFF |
| |
| # VER |
| 20.0:Displays the DOS version. |
| 20.1:DOS kernel version %u.%u |
| 20.2:SvarCOM shell ver |
| 20.3:SvarCOM is a shell interpreter for DOS kernels compatible with MS-DOS 5+. |
| 20.4:This software is distributed under the terms of the MIT license. |
| |
| # TYPE |
| 21.0:Displays the contents of a text file. |
| 21.1:TYPE [drive:][path]filename |
| |
| # TIME |
| 22.0:Displays or sets the system time. |
| 22.1:TIME [time] |
| 22.2:Type TIME with no parameters to display the current time and a prompt for a\r\nnew one. Press ENTER to keep the same time. |
| 22.3:Current time is |
| 22.4:Invalid time |
| 22.5:Enter new time: |
| |
| # SET |
| 23.0:Displays, sets, or removes DOS environment variables. |
| 23.1:SET [variable=[string]] |
| 23.2:variable Specifies the environment-variable name |
| 23.3:string Specifies a series of characters to assign to the variable |
| 23.4:Type SET without parameters to display the current environment variables. |
| 23.5:Not enough available space within the environment block |
| |
| # RD / RMDIR |
| 24.0:Removes (deletes) a directory |
| 24.1:RMDIR [drive:]path |
| 24.2:RD [drive:]path |
| |
| # REN / RENAME |
| 25.0:Renames a file |
| 25.1:RENAME [drive:][path]filename1 filename2 |
| 25.2:REN [drive:][path]filename1 filename2 |
| 25.3:Note that you cannot specify a new drive or path for your destination file.\r\nUse MOVE to rename a directory, or to move files from one directory to another. |
| 25.4:Invalid destination |
| |
| # REM |
| 26.0:Records comments (remarks) in a batch file or CONFIG.SYS |
| 26.1:REM [comment] |
| |
| # PATH |
| 27.0:Displays or sets a search path for executable files. |
| 27.1:PATH [[drive:]path[;...]] |
| 27.2:Type PATH ; to clear all search-path settings and direct DOS to search\r\nonly in the current directory. |
| 27.3:Type PATH without parameters to display the current path. |
| 27.4:No Path |
| |
| # MD / MKDIR |
| 28.0:Creates a directory |
| 28.1:MKDIR [drive:]path |
| 28.2:MD [drive:]path |
| |
| # LN |
| 29.0:Adds, deletes or displays executable links. |
| 29.1:LN ADD linkname targetdir |
| 29.2:LN DEL linkname |
| 29.3:LN LIST [pattern] |
| 29.4:No matching executable found in given path. |
| 29.5:%DOSDIR% not defined |
| |
| # EXIT |
| 30.0:Quits the COMMAND.COM program (command interpreter) |
| |
| # ECHO |
| 31.0:Displays messages, or turns command-echoing on or off |
| 31.1:ECHO [message] |
| 31.2:Type ECHO without parameters to display the current echo setting. |
| 31.3:ECHO is on |
| 31.4:ECHO is off |
| |
| # DATE |
| 32.0:Displays or sets the system date. |
| 32.1:DATE [date] |
| 32.2:Type DATE with no parameters to display the current date and a prompt for a\r\nnew one. Press ENTER to keep the same date. |
| 32.3:Invalid date |
| 32.4:Current date is |
| 32.5:Enter new date: |
| |
| # PROMPT |
| 33.0:Changes the DOS command prompt. |
| 33.1:PROMPT [new command prompt specification] |
| |
| # DOS ERRORS |
| 255.1:Function number invalid |
| 255.2:File not found |